Cab Heater - Install
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
- Position heater (16) onto suitable cribbing.
Show/hide table
Illustration 2 g01125015 - Position relays (18) (not shown) to the outside of heater (16). Install bolts (17). Remove the suitable cribbing under heater (16).
Show/hide table
Illustration 3 g00941772 - Connect harness assemblies (15).
Show/hide table
Illustration 4 g00941769 - Connect hose assemblies (14). Connect hoses (13). Position cable assembly (12). Install bolt (11).
Show/hide table
Illustration 5 g00941762 - Install cover plate (10).
Show/hide table
Illustration 6 g00941771 - Install cover (9).
Show/hide table
Illustration 7 g00941763 Show/hide table
Illustration 8 g00941764 - Connect harness assembly (8). Install cover (7).
Show/hide table
Illustration 9 g00941759 - Install cover (6).
Show/hide table
Illustration 10 g01125009 View from outside cab Show/hide table
Illustration 11 g00941758 - Position cover (5). Install bolts (4).
Show/hide table
Illustration 12 g01124883 - Install covers (3). Position cushion (2) and tighten knob (1).
- Fill the cooling system. Refer to Operation and Maintenance Manual, "Cooling System (ELC) - Change".
- Recharge the air conditioner system. Refer to Service Manual, SENR5664, "Air Conditioning and Heating Systems with R-134a Refrigerant". Refer to Special Publication, NEDG5065, "Air Conditioning Tools".
- Install the primary air filter and the secondary air filter for the cab. Refer to Operation and Maintenance Manual , "Cab Air Filter - Clean/Replace".
Show/hide table
| |
| Illustration 1 | g01125016 |
End By:
- Install the seat. Refer to Disassembly and Assembly, "Seat - Remove and Install".
Caterpillar Information System:
AP-1055D and BG-2455D Asphalt Pavers Propel System Front Idler (Steel Track)
735, 740 and 740 EJECTOR Articulated Trucks Power Train Transmission Hydraulic Control
R1300G Series II Load Haul Dump Walk-Around Inspection
R1300G Series II Load Haul Dump Lift Arm Support Pins
R1300G Series II Load Haul Dump Fire Suppression System (Dry Powder) - If Equipped
R1300G Series II Load Haul Dump Fire Suppression System (Foam) - If Equipped
R2900G Load Haul Dump Radiator Core - Clean
2004/12/20 New Engine Software Improves Sensor Reliability on Wheel Loaders {7620}
2004/12/20 New Pressure Sensor Now Used for 797 and 797B {5574}
2004/12/13 Correction to Special Instruction, "Product Link PL102C System Installation" {7620}
2004/12/13 New VIMS Version 10.43 Class of Onboard Software {7601, 7620}
2004/12/20 New PC Service Tool Software Released for Cellular Based Product Link {7620}
CB-434D and CB-434D XW Vibratory Compactor Machine Systems Eccentric Weight Housing - Install
PS-360C Pneumatic Compactor Propel System Parking Brake
Installing the 218-6738 High Flow Conversion Kit {5057, 5059, 5073, 5264, 5705} Installing the 218-6738 High Flow Conversion Kit {5057, 5059, 5073, 5264, 5705}
834H Wheel Dozer and 836H Landfill Compactor Steering System Pump Performance (Steering) - Test
3500 Engines Connecting Rod Bearings - Remove and Install
TH210 and TH215 Telehandlers Hydraulic System Joystick Control
2004/11/29 A New Bolt is Used for the Aftercooler Cover {1063}
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Gear Pump (Pilot) - Disassemble
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Gear Pump (Pilot) - Assemble
854G Wheel Dozer High Intensity Discharge Lamp (HID) - Replace - If Equipped
TH210 and TH215 Telehandlers Hydraulic System Main Hydraulic System
TK741, TK751 and TK752 Track Feller Bunchers Engine Supplement Turbocharger - Remove and Install - Engine in Chassis