Eccentric Weight Housing - Install
Installation Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 138-7574     | Link Bracket     | 4     |
B     | 4C-4030     | Thread Lock Compound     | 1     |
- Remove bolts (2) and install Tooling (A) .
Show/hide table
Illustration 1 | g01124144 |
Show/hide table
Illustration 2 | g01119894 |
- Attach a suitable lifting device and install eccentric weight (4). Position the alignment mark on eccentric weight (4) with the alignment mark on the drum.
- Remove the suitable lifting device and Tooling (A) .
- Apply Tooling (B) and install bolts (2) and (3). Tighten bolts (2) to 34 ± 6 N·m (25 ± 4 lb ft).
- Attach Tooling (A) and a suitable lifting device in order to lay down drum (1). The weight of drum (1) is approximately 1075 kg (2370 lb).
Show/hide table
Illustration 3 | g01120530 |
End By: Install the drum. Refer to Disassembly and Assembly, "Drum - Remove and Install".
Caterpillar Information System:
TH580B Telehandler Machine Systems Cab Heater - Install
AP-1055D and BG-2455D Asphalt Pavers Propel System Front Idler (Steel Track)
735, 740 and 740 EJECTOR Articulated Trucks Power Train Transmission Hydraulic Control
R1300G Series II Load Haul Dump Walk-Around Inspection
R1300G Series II Load Haul Dump Lift Arm Support Pins
R1300G Series II Load Haul Dump Fire Suppression System (Dry Powder) - If Equipped
R1300G Series II Load Haul Dump Fire Suppression System (Foam) - If Equipped
R2900G Load Haul Dump Radiator Core - Clean
2004/12/20 New Engine Software Improves Sensor Reliability on Wheel Loaders {7620}
2004/12/20 New Pressure Sensor Now Used for 797 and 797B {5574}
2004/12/13 Correction to Special Instruction, "Product Link PL102C System Installation" {7620}
2004/12/13 New VIMS Version 10.43 Class of Onboard Software {7601, 7620}
PS-360C Pneumatic Compactor Propel System Parking Brake
Installing the 218-6738 High Flow Conversion Kit {5057, 5059, 5073, 5264, 5705} Installing the 218-6738 High Flow Conversion Kit {5057, 5059, 5073, 5264, 5705}
834H Wheel Dozer and 836H Landfill Compactor Steering System Pump Performance (Steering) - Test
3500 Engines Connecting Rod Bearings - Remove and Install
TH210 and TH215 Telehandlers Hydraulic System Joystick Control
2004/11/29 A New Bolt is Used for the Aftercooler Cover {1063}
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Gear Pump (Pilot) - Disassemble
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Gear Pump (Pilot) - Assemble
854G Wheel Dozer High Intensity Discharge Lamp (HID) - Replace - If Equipped
TH210 and TH215 Telehandlers Hydraulic System Main Hydraulic System
TK741, TK751 and TK752 Track Feller Bunchers Engine Supplement Turbocharger - Remove and Install - Engine in Chassis
3508C, 3512C and 3516C Marine Engines Crankshaft Main Bearings - Install