Drive and Steering Axle (Front) - Install
Installation Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 1U-7505     | Hydraulic Jack     | 1     |
- Use Tooling (A) and suitable cribbing in order to install front axle (3) into position. The weight of front axle (3) is approximately 499 kg (1100 lb).
Show/hide table
Illustration 1 | g01082117 |
- Install bolts (4). Repeat for the rear of the front axle.
- Connect hose assemblies (1) .
Show/hide table
Illustration 2 | g01082059 |
- Connect tube assembly (2). Repeat for the other side.
End By:
- Install the front drive shaft. Refer to Disassembly and Assembly, "Drive Shaft (Front) - Remove and Install".
- Install the front tires. Refer to Disassembly and Assembly, "Tire and Rim (Front) - Remove and Install".
Caterpillar Information System:
446D Backhoe Loader Power Train Drive and Steering Axle (Front) - Remove
988H Wheel Loader Power Train Engagement Pressure for the Transmission Clutch (Operator Monitor) - Calibrate
2004/07/05 Improved Analysis of Non-Warrantable Failures for Reman Vane Cartridges {5055}
446D Backhoe Loader Power Train Steering Cylinder (Front) - Remove and Install
2004/07/01 Engines Are Now Built with Semi-Crowned Lifter Rollers {1209}
446D Backhoe Loader Power Train Tie Rod (Steering)(Front) - Remove and Install
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Machine Systems Front Frame from Rear Frame - Separate
2004/06/21 Special Instruction, REHS2149, "Explanation of Common Event Codes and Transmission Shift Matrix" is now Available {4800, 4808}
R2900G Load Haul Dump Machine Systems Accumulator Charging Valve (Brake) - Install
R2900G Load Haul Dump Machine Systems Accumulator Charging Valve (Brake) - Remove
CP-323C and CS-323C Paving Compactors Machine Systems Wheel and Tire - Remove and Install
988H Wheel Loader Machine Systems Evaporator Coil and Heater Coil - Install
446D Backhoe Loader Engine Supplement Hydraulic Oil Cooler - Remove and Install
446D Backhoe Loader Power Train Final Drive (Drive and Steering Axle)(Front) - Remove
2004/08/02 New Proportional Control Handle Is Now Available {5705}
446D Backhoe Loader Power Train Final Drive (Drive and Steering Axle)(Front) - Disassemble - In Chassis
AP-800D and BG-230D Asphalt Pavers Machine Systems Truck Hitch
R2900G Load Haul Dump Machine Systems Bucket - Remove
R1300G Load Haul Dump 3306 Engine Supplement Air Cleaner - Remove and Install
R2900G Load Haul Dump Power Train Differential and Bevel Gear (Front) - Remove
R2900G Load Haul Dump Machine Systems Bucket - Install
2004/07/26 Correction to Disassembly and Assembly, RENR4884 , "Track (Rubber) - Remove and Install - 287B Multi Terrain Loader" {4198}
446D Backhoe Loader Power Train Final Drive (Drive and Steering Axle)(Front) - Assemble - In Chassis
446D Backhoe Loader Power Train Final Drive (Drive and Steering Axle)(Front) - Install