Truck Hitch
Show/hide table
 | |
| Illustration 1 | g01084420 |
(1) Use 8I-0626 Washer in order to limit the end play. ... 4 mm (0.16 inch)
(2) Apply 4C-5599 Anti-Seize Compound on the inside 8I-0565 Extension Tube and onto the 8I-0565 Extension Tube before you assemble the extension tube.
(3) Apply 9S-3263 Thread Lock Compound onto the 166-4654 Side Roller .
(4) Apply 9S-3263 Thread Lock Compound onto the 4K-1493 Hollow Screw.
(5) Tighten 6V-8182 Nut to the following torque. ... 136 ± 20 N·m (100 ± 15 lb ft)
Caterpillar Information System:
446D Backhoe Loader Power Train Final Drive (Drive and Steering Axle)(Front) - Disassemble - In Chassis
2004/08/02 New Proportional Control Handle Is Now Available {5705}
446D Backhoe Loader Power Train Final Drive (Drive and Steering Axle)(Front) - Remove
446D Backhoe Loader Engine Supplement Hydraulic Oil Cooler - Remove and Install
446D Backhoe Loader Power Train Drive and Steering Axle (Front) - Install
446D Backhoe Loader Power Train Drive and Steering Axle (Front) - Remove
988H Wheel Loader Power Train Engagement Pressure for the Transmission Clutch (Operator Monitor) - Calibrate
2004/07/05 Improved Analysis of Non-Warrantable Failures for Reman Vane Cartridges {5055}
446D Backhoe Loader Power Train Steering Cylinder (Front) - Remove and Install
2004/07/01 Engines Are Now Built with Semi-Crowned Lifter Rollers {1209}
446D Backhoe Loader Power Train Tie Rod (Steering)(Front) - Remove and Install
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Machine Systems Front Frame from Rear Frame - Separate
R2900G Load Haul Dump Machine Systems Bucket - Remove
R1300G Load Haul Dump 3306 Engine Supplement Air Cleaner - Remove and Install
R2900G Load Haul Dump Power Train Differential and Bevel Gear (Front) - Remove
R2900G Load Haul Dump Machine Systems Bucket - Install
2004/07/26 Correction to Disassembly and Assembly, RENR4884 , "Track (Rubber) - Remove and Install - 287B Multi Terrain Loader" {4198}
446D Backhoe Loader Power Train Final Drive (Drive and Steering Axle)(Front) - Assemble - In Chassis
446D Backhoe Loader Power Train Final Drive (Drive and Steering Axle)(Front) - Install
AP-800D and BG-230D Asphalt Pavers Machine Systems Solenoid Valve (Truck Hitch)
988H Wheel Loader Power Train Engagement Pressure for the Lockup Clutch of the Torque Converter (Operator Monitor) - Calibrate
446D Backhoe Loader Power Train Transmission (Power Shift) - Remove
446D Backhoe Loader Power Train Transmission (Power Shift) - Disassemble
446D Backhoe Loader Power Train Transmission (Power Shift) - Assemble