1990/12/17 Caterpillar


Remanufactured Camshafts And Cam Kits Available For Parts Service{1210,1211,1212}

Usage:


3200, 3300, And 3400 Families Of Engines

Reference: Information Release Memo (IRM), REM90-12, PELE0170, "Remanufactured Camshafts And Cam Kits For 3200, 3300, And 3400 Engines". Core Acceptance Guide, SELD0049, "Camshafts And Camshaft Kits".

Remanufactured Camshafts and Cam Kits are available for parts service for the above engine families. Priced at approximately 30 to 50 percent of new, this product program offers another support service for dealer overhauls and qualifies for dealer rebates (U.S. dealers only). Also, Remanufactured Camshafts and Cam Kits are covered by the same factory warranty extended to new parts.

See the Reference for more complete information.

Caterpillar Information System:

1990/12/17 Use The Marketing Publications Information Feedback Systems{0374}
1990/12/10 New Engine Magnetic Speed Sensor Used{1907}
1990/12/10 Tools Available For Out-Of-Chassis Dynamometer Testing Of Electronic Engines{0781,1901,1913}
1990/12/10 New Rear Power Takeoff Clutch Plates Do Not Contain Asbestos{3055,3404}
1990/12/10 New 7E5085 Bushing Replaces Former 2M4314 Bushing In Fuel Injection Pump Groups{1251}
1990/12/10 Correct Handling And Replacement of 3T6962 Pressure Switch Assembly{7332}
1990/12/10 Correct Handling And Installation Of Temperature Switch Assemblies{1906}
1990/12/10 Improved 9W1077 Start Switch Assembly And 7N4160 Heat Start Switch Group{1416}
1990/12/10 New Caterpillar Warranty Statement For Ground Engaging Tools, SELF5138{6800}
1990/11/26 New Expansion Tank Used{1354}
1990/11/26 New Oil Pressure Sender Assembly Improves Accuracy Of Oil Pressure Indicator{7455}
1990/11/26 Use Status Screen On Electronic Control Analyzer Programmer (ECAP) When Checking The Calibration Of The Timing And Rack Sensors; Correction To Systems Operation, Testing & Adjusting for 3406B (PEEC) Diesel Truck Engine, Form SENR3485-01{1905,1911
1990/12/17 New Bronze Thrust Plate Used On Center Main Bearing Of Crankshaft Groups{1203}
1990/12/17 New Rotor Used In BrakeSaver Group; Regulator Valve Improved{1155}
1990/12/17 Personality Module Software Updated; Do Not Troubleshoot Diagnostic Code 55 (No Detected Faults){1901,1902}
1990/12/17 New Ether Starting Aid Groups Available{1456}
1990/12/24 Sealed Alternators Available For Earthmoving Applications{1405}
1990/12/24 Incorrect Specification For Tightening Turbocharger Compressor Nut In Service Manual For 3306B Diesel Truck Engine, SEBR0545-01{1052}
1990/12/24 Installation Of Zinc Rods In Caterpillar Marine Engines{1350,1388}
1990/12/24 Air Pressure Settings For Pneumatic Selector Control Valve On Reintjes® Marine Transmissions{3313}
1990/12/24 Update Information For Exhaust Manifolds{1059}
1990/12/24 New 3E0020 Vehicle Speed Buffer Used{1914,1900}
1990/12/24 New Seals Available For Parts Service Of Noncurrent Water Lines Group{1380,1155,1378}
1990/12/24 Oversized Intake And Exhaust Valve Seat Inserts Available For Spark-Ignited Engine Heads{1103}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.