1990/12/10 Caterpillar


New 7E5085 Bushing Replaces Former 2M4314 Bushing In Fuel Injection Pump Groups{1251}

Usage:


Description of Change: A new phosphate-coated bushing (charcoal colored) is used in the fuel injection pump group. A shallow lip is machined on the top side of the bushing for easy identification. The new bushing requires less torque 160 ± 14 N·m (120 ± 10 lb ft) when installed. The former zinc-plated bushing was tightened to 205 ± 14 N·m (153 ± 10 lb ft).

Adaptable To: The new 7E5085 Bushing is a direct replacement for the former 2M4314 Bushing.

NOTE: Tightening the new bushing to the former bushing torque may result in damage to the fuel injection pump housing.


Typical example of location of bushing.

Caterpillar Information System:

1990/12/10 Correct Handling And Replacement of 3T6962 Pressure Switch Assembly{7332}
1990/12/10 Correct Handling And Installation Of Temperature Switch Assemblies{1906}
1990/12/10 Improved 9W1077 Start Switch Assembly And 7N4160 Heat Start Switch Group{1416}
1990/12/10 New Caterpillar Warranty Statement For Ground Engaging Tools, SELF5138{6800}
1990/11/26 New Expansion Tank Used{1354}
1990/11/26 New Oil Pressure Sender Assembly Improves Accuracy Of Oil Pressure Indicator{7455}
1990/11/26 Use Status Screen On Electronic Control Analyzer Programmer (ECAP) When Checking The Calibration Of The Timing And Rack Sensors; Correction To Systems Operation, Testing & Adjusting for 3406B (PEEC) Diesel Truck Engine, Form SENR3485-01{1905,1911
1990/11/26 Service Tips For Piston Cooling Jets (Tubes){1331}
1990/11/26 New Air Compressor Crankshaft Has Improved Spline Lubrication{1803}
1990/11/26 Improved Fuel Injection Pump Groups Have New Injector Groups{1290}
1990/11/26 New Shim Improves Low Idle Stability Of Governor{1265,1256}
1990/11/19 Planetary Housing Requires Two Ball Plugs{3160}
1990/12/10 New Rear Power Takeoff Clutch Plates Do Not Contain Asbestos{3055,3404}
1990/12/10 Tools Available For Out-Of-Chassis Dynamometer Testing Of Electronic Engines{0781,1901,1913}
1990/12/10 New Engine Magnetic Speed Sensor Used{1907}
1990/12/17 Use The Marketing Publications Information Feedback Systems{0374}
1990/12/17 Remanufactured Camshafts And Cam Kits Available For Parts Service{1210,1211,1212}
1990/12/17 New Bronze Thrust Plate Used On Center Main Bearing Of Crankshaft Groups{1203}
1990/12/17 New Rotor Used In BrakeSaver Group; Regulator Valve Improved{1155}
1990/12/17 Personality Module Software Updated; Do Not Troubleshoot Diagnostic Code 55 (No Detected Faults){1901,1902}
1990/12/17 New Ether Starting Aid Groups Available{1456}
1990/12/24 Sealed Alternators Available For Earthmoving Applications{1405}
1990/12/24 Incorrect Specification For Tightening Turbocharger Compressor Nut In Service Manual For 3306B Diesel Truck Engine, SEBR0545-01{1052}
1990/12/24 Installation Of Zinc Rods In Caterpillar Marine Engines{1350,1388}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.