1990/12/10 Caterpillar


New Caterpillar Warranty Statement For Ground Engaging Tools, SELF5138{6800}

Usage:


A new Caterpillar Warranty Statement for Ground Engaging Tools has been released. The warranty includes coverage of the new CAT GraderBit adapter and GraderBit (except for carbide element and bonding material).

This warranty also covers the parent material of the ground engaging tools, when Caterpillar-sourced Abrasion-Resistant Material (ARM) has been applied by a Caterpillar dealer.

Limitations

Caterpillar is not responsible for breakage of ground engaging tools due to worn mating components or those that have been hardfaced or improperly welded.

Cracks in the "ARM" weld and chipping of hard particles out of the weld are not considered "breakage" under the terms of this warranty.

Caterpillar Information System:

1990/11/26 New Expansion Tank Used{1354}
1990/11/26 New Oil Pressure Sender Assembly Improves Accuracy Of Oil Pressure Indicator{7455}
1990/11/26 Use Status Screen On Electronic Control Analyzer Programmer (ECAP) When Checking The Calibration Of The Timing And Rack Sensors; Correction To Systems Operation, Testing & Adjusting for 3406B (PEEC) Diesel Truck Engine, Form SENR3485-01{1905,1911
1990/11/26 Service Tips For Piston Cooling Jets (Tubes){1331}
1990/11/26 New Air Compressor Crankshaft Has Improved Spline Lubrication{1803}
1990/11/26 Improved Fuel Injection Pump Groups Have New Injector Groups{1290}
1990/11/26 New Shim Improves Low Idle Stability Of Governor{1265,1256}
1990/11/19 Planetary Housing Requires Two Ball Plugs{3160}
1990/11/19 New 4C6715 Silicone Compound Available For Components Where Centrifugal Force Is Present{4465,4466,4472,4473}
1990/11/19 Field Replacement Of Spacer To Correct Possible Sticking In Woodward 3161 Governor Electric Shutoff Group{1264}
1990/11/19 New Camshaft Has Improved Wear Resistance{1210,1209}
1990/11/19 New Roller Camshaft Used{1209,1210}
1990/12/10 Improved 9W1077 Start Switch Assembly And 7N4160 Heat Start Switch Group{1416}
1990/12/10 Correct Handling And Installation Of Temperature Switch Assemblies{1906}
1990/12/10 Correct Handling And Replacement of 3T6962 Pressure Switch Assembly{7332}
1990/12/10 New 7E5085 Bushing Replaces Former 2M4314 Bushing In Fuel Injection Pump Groups{1251}
1990/12/10 New Rear Power Takeoff Clutch Plates Do Not Contain Asbestos{3055,3404}
1990/12/10 Tools Available For Out-Of-Chassis Dynamometer Testing Of Electronic Engines{0781,1901,1913}
1990/12/10 New Engine Magnetic Speed Sensor Used{1907}
1990/12/17 Use The Marketing Publications Information Feedback Systems{0374}
1990/12/17 Remanufactured Camshafts And Cam Kits Available For Parts Service{1210,1211,1212}
1990/12/17 New Bronze Thrust Plate Used On Center Main Bearing Of Crankshaft Groups{1203}
1990/12/17 New Rotor Used In BrakeSaver Group; Regulator Valve Improved{1155}
1990/12/17 Personality Module Software Updated; Do Not Troubleshoot Diagnostic Code 55 (No Detected Faults){1901,1902}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.