New 4C6715 Silicone Compound Available For Components Where Centrifugal Force Is Present{4465,4466,4472,4473}
Usage:
All SR 4 Generators
A new 4C6715 Silicone Compound is available for applications that require a heat transfer between components where centrifugal force is present. Such as, between rectifier, or diodes and the heat sink attached to the rotors of generators.
The labels, on the two components that make up the 4C6715 Silicone Compound, include applications and instructions for using them. The silicone compound is sent directly from the supplier. The shelf life of this compound is six months. The compound should be stored in a dry cool place.
Caterpillar Information System:
1990/11/19 Field Replacement Of Spacer To Correct Possible Sticking In Woodward 3161 Governor Electric Shutoff Group{1264}
1990/11/19 New Camshaft Has Improved Wear Resistance{1210,1209}
1990/11/19 New Roller Camshaft Used{1209,1210}
1990/11/19 Use Only Stainless Steel Cylinder Liner Shims To Salvage Damaged 4.75" Bore Cylinder Blocks{1201,1216,1217}
1990/11/19 Check Engine Speed Sensor And/Or Crank Angle Sensor (Magnetic Pickups) For Fouling{1912,1900,1907,7529}
1990/11/19 Correct Procedures For Starting, Stopping And Transporting A Product With A Turbocharged Engine{1052}
1990/11/19 New Caterpillar Battery Warranty Statement, SELF5124{1401,7780}
1990/11/19 Diagnostic Connector Used To Determine Starter Problems; Starter Monitor Unit Can Be Fabricated{0710,1408,1416,1426,1467,1553}
1990/11/12 New Alternator Drive Pulley Seal Used With New Drive Pulley; Poly-Vee Belt Can Be Installed {1425,1357}
1990/11/12 Adjustable Exhaust Bypass Group Used; Provides More Precise Ability To Set Exhaust Pressure {1057}
1990/11/12 New 7X1400 Digital Diagnostic Tool (DDT) Group Available {0782,0785,1900}
1990/11/05 New Crankshaft Seal Groups Used{1160,1161,1202}
1990/11/19 Planetary Housing Requires Two Ball Plugs{3160}
1990/11/26 New Shim Improves Low Idle Stability Of Governor{1265,1256}
1990/11/26 Improved Fuel Injection Pump Groups Have New Injector Groups{1290}
1990/11/26 New Air Compressor Crankshaft Has Improved Spline Lubrication{1803}
1990/11/26 Service Tips For Piston Cooling Jets (Tubes){1331}
1990/11/26 Use Status Screen On Electronic Control Analyzer Programmer (ECAP) When Checking The Calibration Of The Timing And Rack Sensors; Correction To Systems Operation, Testing & Adjusting for 3406B (PEEC) Diesel Truck Engine, Form SENR3485-01{1905,1911
1990/11/26 New Oil Pressure Sender Assembly Improves Accuracy Of Oil Pressure Indicator{7455}
1990/11/26 New Expansion Tank Used{1354}
1990/12/10 New Caterpillar Warranty Statement For Ground Engaging Tools, SELF5138{6800}
1990/12/10 Improved 9W1077 Start Switch Assembly And 7N4160 Heat Start Switch Group{1416}
1990/12/10 Correct Handling And Installation Of Temperature Switch Assemblies{1906}
1990/12/10 Correct Handling And Replacement of 3T6962 Pressure Switch Assembly{7332}