1992/04/01 Caterpillar


Component Cross Reference Lists For Programed Electronic Engine Control (PEEC) Systems

Usage:


3406B, 3406C (8TC, 5YG, 2EK, 4CK) Truck Engines

SUPPLEMENT: April 1993

Truck Engine News, April 1992, Page 3, "Component Cross Reference Lists For Programed Electronic Engine Control (PEEC) Systems

Disregard this article. Make reference to the article with the title "Component Cross Reference Lists For Programed Electronic Engine Control (PEEC) And Electronic Systems ", in this issue.

--------------- END SUPPLEMENT ---------------

The following charts are provided to assist in selecting replacement components for the various PEEC systems. Always use the "Current Recommended Field Service Part Number" as listed in the charts, when making field repairs. See the Chart Title to determine which chart to use.

Caterpillar Information System:

1992/04/01 New Turbocharger Groups With Ceramic Turbine Wheels Used
1992/04/01 Procedure To Repair Damaged Oil Pan Drain Hole Threads
1992/04/01 Identification Of Remanufactured Direct Injection Fuel Nozzles (DlFN)
1992/04/01 New Spring Used In Governor Control Groups
1992/03/01 9U5839 Liquid Gasket Material Available For Use With Aluminum
1992/03/01 Videotapes Provide 3406 Truck Engine Maintenance Information
1992/03/01 New Electronic Control Groups (Rack Position Sensor And Timing Position Sensor) Provide Increased Reliability
1992/03/01 Troubleshooting Electrical Noise Problems
1992/03/01 Thinner Spacer Plate Available For Parts Service
1992/03/01 New And Improved Operation And Maintenance Manuals Available
1992/03/01 Improved Hose In Turbocharger Oil Lines Group Resists Deterioration Caused By Heat
1992/03/01 Procedure For Putting 9U5839 Liquid Gasket Material On Cylinder Liner
1992/04/01 Be Sure To Use Correct Installation Procedure For Core Plug Block Heaters (Engine Coolant Heaters)
1992/04/01 New Caterpillar Engine Oil Nomenclature
1992/04/01 Engine Oil Recommendations Have Been Changed
1992/05/01 New Components Used In Fuel Ratio Control Groups
1992/05/01 New Turbocharger Groups Help Prevent Surge (Popping)
1992/05/01 Spring Used To Hold Valve In Position In Remanufactured Fuel Transfer Pumps
1992/05/01 Fuel Injector Group Rack Movement
1992/05/01 Bearings Available For Schwitzer Turbochargers
1992/05/01 Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze
1992/06/01 4P6493 Governor Information Plate Available
1992/06/01 Centrifugal Lube Filter Group Available
1992/06/01 New Training Material On 3306C And 3406C Truck Engines Available
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.