9U5839 Liquid Gasket Material Available For Use With Aluminum
Usage:
New 9U5839 Liquid Gasket Material is available for use with aluminum. This new liquid gasket material does NOT cause degradation of aluminum. This new liquid gasket material is contained in a 4 ounce collapsible tube and is 80 percent (by weight) Acetone. The 9U5839 Liquid Gasket Material is flammable and should be used only in a well ventilated area. The 9U5839 Liquid Gasket Material can be used in place of 7M7260 Liquid Gasket Material in any application.
The 7M7260 Liquid Gasket Material should NOT be used on aluminum. The 7M7260 Liquid Gasket Material is 90 percent (by weight) 1,1,1 Trichloroethane which can cause aluminum degradation. The 7M7260 Liquid Gasket Material can be used on non-aluminum applications.
Caterpillar Information System:
1992/03/01 Videotapes Provide 3406 Truck Engine Maintenance Information
1992/03/01 New Electronic Control Groups (Rack Position Sensor And Timing Position Sensor) Provide Increased Reliability
1992/03/01 Troubleshooting Electrical Noise Problems
1992/03/01 Thinner Spacer Plate Available For Parts Service
1992/03/01 New And Improved Operation And Maintenance Manuals Available
1992/03/01 Improved Hose In Turbocharger Oil Lines Group Resists Deterioration Caused By Heat
1992/03/01 Procedure For Putting 9U5839 Liquid Gasket Material On Cylinder Liner
1992/02/01 List Of Service Publication
1992/02/01 New Fuel Line Assemblies And Adapter Assembly Used{1252}
1992/02/01 Be Sure To Use Correct Connector/Connectors Between Fuel Transfer Pump Outlet And Tube To Fuel Filter{1274,1256}
1992/02/01 1P8116 O-Ring Seal Available To Service Unit Injectors{1290}
1992/02/01 Procedure To Repair Oil Leak At Rear Camshaft Cover{1221}
1992/04/01 New Spring Used In Governor Control Groups
1992/04/01 Identification Of Remanufactured Direct Injection Fuel Nozzles (DlFN)
1992/04/01 Procedure To Repair Damaged Oil Pan Drain Hole Threads
1992/04/01 New Turbocharger Groups With Ceramic Turbine Wheels Used
1992/04/01 Component Cross Reference Lists For Programed Electronic Engine Control (PEEC) Systems
1992/04/01 Be Sure To Use Correct Installation Procedure For Core Plug Block Heaters (Engine Coolant Heaters)
1992/04/01 New Caterpillar Engine Oil Nomenclature
1992/04/01 Engine Oil Recommendations Have Been Changed
1992/05/01 New Components Used In Fuel Ratio Control Groups
1992/05/01 New Turbocharger Groups Help Prevent Surge (Popping)
1992/05/01 Spring Used To Hold Valve In Position In Remanufactured Fuel Transfer Pumps
1992/05/01 Fuel Injector Group Rack Movement