- Electric Power Generation
- 3512B GENSET (S/N: K7E1-140)
- 3516B GEN SET (S/N: K7F1-131)
- 3516C GEN SET (S/N: SBK1-2549)
- C175-16 GEN SET (S/N: WYB1-2112)
- 3516B GEN SET (S/N: K7F1-131)
- Engine
- 3512 (S/N: JM21-112; YBA1-448; YAX1-1343)
- 3512B (S/N: JM31-118; JM41-102; LY81-234; YBB1-588; YBC1-148; 8RM1-2239; YAN1-92004; YAY1-92002; YAZ1-870)
- 3512C (S/N: YBD1-527; LYH1-203)
- 3516 (S/N: JCG1-107; YAL1-719; YAS1-1016)
- 3516B (S/N: GD31-157; JCH1-152; JCN1-409; 7RN1-2266; YAP1-92030; ZBP1-306; YAR1-938; GZS1-954; GZT1-178)
- 3516C (S/N: SCJ1-1007; SFJ1-934; SCK1-1007; SEK1-1280)
- 3516E (S/N: LCK1-119)
- C175-16 (S/N: WYC1-2013)
- C175-20 (S/N: BXR1-1969)
- 3512B (S/N: JM31-118; JM41-102; LY81-234; YBB1-588; YBC1-148; 8RM1-2239; YAN1-92004; YAY1-92002; YAZ1-870)
- Generator Set
- C27 GEN SET (S/N: 2A31-296; GDS1-1066; T4Z1-483)
- C32 GEN SET (S/N: AL61-251; K7C1-975; NRC1-538; SXC1-92020; JSJ1-92001; FLX1-351; JAZ1-4190)
- Power Module
- PM3516 (S/N: NBR1-952)
- XQC1200 (S/N: N1G1-120)
- XQC1600 (S/N: N1M1-315)
- XQC1200 (S/N: N1G1-120)
Description Of Change: The new contact blocks are gold plated and can operate on low voltage and low current. Also, the new contact blocks have an improved ability to recognize the emergency stop event resets in the engine ECM and EMCP.
Adaptable To:
Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is your responsibility. |
The new and former contact blocks are listed in Table 1.
New Part Number | Part Name | Former Part Number |
---|---|---|
Contact Block | ||
Contact Block | ||
Contact Block |
The 539-6662 Contact Block has 1 Normally Open contact and 1 Normally Closed contact.
The 539-6663 Contact Block has 1 Normally Open contact.
Illustration 1 | g06285875 |
Correct position of the |
Illustration 2 | g06285879 |
Incorrect position of the |
Ensure that the 539-6663 Contact Block is used in middle. Incorrect placing of this block may lead to contact sticky operation.