Air Starting Motor Pressure Regulating Valve
Show/hide table
| |
| Illustration 1 | g06265882 |
Show/hide table
| |
| Illustration 2 | g06265889 |
|
Tightening sequence | |
Show/hide table
| Item | Qty | Part | Specification Description |
| 1 | 8 | 9X-8873 Bolt | Use the following procedure to tighten the bolts:
1. Tighten bolt 1 through bolt 4 in the numerical sequence as shown in Illustration 2 to a torque of 2. Tighten bolt 1 through bolt 4 in the numerical sequence as shown in Illustration 2 to a torque of 3. Tighten bolt 1 through bolt 4 in the numerical sequence as shown in Illustration 2 to a torque of 4. Again Tighten bolt 1 through bolt 4 in the numerical sequence as shown in Illustration 2 to a torque of |
| 2 | 1 | 489-1434 Solenoid Valve Gp | Final installation torque is |
Caterpillar Information System:
3516B Generator Set with Dynamic Gas Blending Piston and Rings
3516B Generator Set with Dynamic Gas Blending Cylinder Head Valves
3516B Generator Set with Dynamic Gas Blending Cylinder Head
320 D3 Hydraulic Excavators Engine Disassembly and Assembly Cylinder Liner - Remove and Install
XQP1100 Generator Set Generator Bearing - Lubricate
New Engine Software is Now Used for Certain C175 Generator Set Engines {1920} New Engine Software is Now Used for Certain C175 Generator Set Engines {1920}
New Engine Software is Now Used for Certain C175 50Hz Generator Set Engines {1920} New Engine Software is Now Used for Certain C175 50Hz Generator Set Engines {1920}
Cat® Detect Object Detection Hardware Generation 4 for Small Off Highway Trucks, Motor Graders, Large Wheel Loaders, Large Wheel Dozers and Articulated Trucks Product Identification
XQP1100 Generator Set Parallel Operation
Cat® Detect Object Detection Hardware Generation 4 for Small Off Highway Trucks, Motor Graders, Large Wheel Loaders, Large Wheel Dozers and Articulated Trucks Declaration of Conformity
336 Excavators (Powered by C9.3 Tier 4 Engine) Engine Supplement Belt Tensioner - Remove and Install
G3516 TA Engine Restriction of Air Inlet and Exhaust
PM820, PM822, and PM825 Cold Planer Machine Systems Piston Pump (Hydraulic Fan) - Remove and Install
3516B Generator Set with Dynamic Gas Blending Air Inlet and Exhaust Lines
336, 336 GC and 340 Excavator Systems Pump Control (Output Flow) - Adjust
3516B Generator Set with Dynamic Gas Blending Air Inlet and Exhaust Lines
3516B Generator Set with Dynamic Gas Blending Engine Oil Lines
New E-Stop Contact Blocks Are Now Used on Certain Cat® Engines {1408, 7418} New E-Stop Contact Blocks Are Now Used on Certain Cat® Engines {1408, 7418}
3516B Generator Set with Dynamic Gas Blending Cylinder Block
XQP1100 Generator Set Fuel System Primary Filter (Water Separator) Element - Replace - If equipped
XQP1100 Generator Set Fuel System Primary Filter/Water Separator - Drain - If equipped
XQP1100 Generator Set Fuel System Primary Filter/Water Separator - Drain - If Equipped
XQP1100 Generator Set Declaration of Conformity
List of Caterpillar Service Centers for Napier Turbochargers {0374, 1052, 7513} List of Caterpillar Service Centers for Napier Turbochargers {0374, 1052, 7513}