Engine Oil Lines
Show/hide table
| |
| Illustration 1 | g06265947 |
Show/hide table
| Item | Qty | Part | Specification Description |
| 1 | 6 | 0S-1594 Bolt | Use the following bolt tightening sequence to tighten the clamp bolts:
Place the clamp assembly so that the clamp assembly is snug against the tube assembly. Tighten the clamp assembly to the elbow. Tighten the clamp assembly to the tube assembly. |
| 2 | 2 | 0S-1571 Bolt | |
| 3 | 2 | 109-2332 O-Ring Seal | Lightly, lubricate the bore with the fluid that is being sealed. |
| 4 | 1 | 2W-1635 Spring | Length under test force is |
| Test force is |
|||
| Free length after test is |
|||
| 5 | 1 | 2W-1969 Bypass Valve | Valve must open with a pressure difference of |
| 6 | 2 | 7N-7697 Plunger | Valves must start to open at a pressure difference of |
| Valves must be fully open at a pressure difference of |
|||
| 7 | 2 | 6B-9202 Spring | Length under test force is |
| Test force is |
|||
| Free length after test is |
Caterpillar Information System:
3516B Generator Set with Dynamic Gas Blending Air Inlet and Exhaust Lines
336, 336 GC and 340 Excavator Systems Pump Control (Output Flow) - Adjust
3516B Generator Set with Dynamic Gas Blending Air Inlet and Exhaust Lines
PM820, PM822, and PM825 Cold Planer Machine Systems Piston Pump (Hydraulic Fan) - Remove and Install
3516B Generator Set with Dynamic Gas Blending Air Starting Motor Pressure Regulating Valve
3516B Generator Set with Dynamic Gas Blending Piston and Rings
3516B Generator Set with Dynamic Gas Blending Cylinder Head Valves
3516B Generator Set with Dynamic Gas Blending Cylinder Head
320 D3 Hydraulic Excavators Engine Disassembly and Assembly Cylinder Liner - Remove and Install
XQP1100 Generator Set Generator Bearing - Lubricate
New Engine Software is Now Used for Certain C175 Generator Set Engines {1920} New Engine Software is Now Used for Certain C175 Generator Set Engines {1920}
New Engine Software is Now Used for Certain C175 50Hz Generator Set Engines {1920} New Engine Software is Now Used for Certain C175 50Hz Generator Set Engines {1920}
New E-Stop Contact Blocks Are Now Used on Certain Cat® Engines {1408, 7418} New E-Stop Contact Blocks Are Now Used on Certain Cat® Engines {1408, 7418}
3516B Generator Set with Dynamic Gas Blending Cylinder Block
XQP1100 Generator Set Fuel System Primary Filter (Water Separator) Element - Replace - If equipped
XQP1100 Generator Set Fuel System Primary Filter/Water Separator - Drain - If equipped
XQP1100 Generator Set Fuel System Primary Filter/Water Separator - Drain - If Equipped
XQP1100 Generator Set Declaration of Conformity
List of Caterpillar Service Centers for Napier Turbochargers {0374, 1052, 7513} List of Caterpillar Service Centers for Napier Turbochargers {0374, 1052, 7513}
C7.1 Marine Propulsion Engine Alternator Belt - Remove and Install
336 and 336 GC Excavator Cooling System Coolant Level - Check
XQP1100 Generator Set Emergency Stopping
G3516 TA Engine Fuel System Operation
XQP1100 Generator Set Fuel System Secondary Filter - Replace