New Engine Software is Now Used for Certain C175 Generator Set Engines {1920}
- Electric Power Generation
- C175-16 GEN SET (S/N: WYB1-2138)
- Engine
- C175-20 (S/N: BXR1-1989)
Description Of Change: The new engine software that is used improves transient response of the engine prior to reaching desired coolant and inlet air manifold temperatures to improve performance.
Adaptable To: The following changes are adaptable to the products within the listed serial numbers, and are effective with all products after the listed serial numbers.
The table below contains the new and previous software part numbers.
Show/hide table
| New Software Part Number | Part Name | Previous Software Part Number |
|---|---|---|
| Engine Software | ||
| Engine Software | ||
| Engine Software | ||
| Engine Software | ||
| Engine Software | ||
| Engine Software | ||
| Engine Software | ||
| Engine Software | ||
| Engine Software | ||
| Engine Software | ||
| Engine Software |
Caterpillar Information System:
New Engine Software is Now Used for Certain C175 50Hz Generator Set Engines {1920} New Engine Software is Now Used for Certain C175 50Hz Generator Set Engines {1920}
Cat® Detect Object Detection Hardware Generation 4 for Small Off Highway Trucks, Motor Graders, Large Wheel Loaders, Large Wheel Dozers and Articulated Trucks Product Identification
XQP1100 Generator Set Parallel Operation
Cat® Detect Object Detection Hardware Generation 4 for Small Off Highway Trucks, Motor Graders, Large Wheel Loaders, Large Wheel Dozers and Articulated Trucks Declaration of Conformity
336 Excavators (Powered by C9.3 Tier 4 Engine) Engine Supplement Belt Tensioner - Remove and Install
G3516 TA Engine Restriction of Air Inlet and Exhaust
794 AC Off-Highway Truck Machine Systems Wheel and Brake - Remove and Install
XQP1100 Generator Set Generator Winding - Test
XQP1100 Generator Set Coolant Sample (Level 1) - Obtain
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Lifting Capacities
336 and 336 GC Excavator Belt - Inspect/Adjust/Replace
C32 XQP1100 Generator Sets Coolant Level Is Low
XQP1100 Generator Set Generator Bearing - Lubricate
320 D3 Hydraulic Excavators Engine Disassembly and Assembly Cylinder Liner - Remove and Install
3516B Generator Set with Dynamic Gas Blending Cylinder Head
3516B Generator Set with Dynamic Gas Blending Cylinder Head Valves
3516B Generator Set with Dynamic Gas Blending Piston and Rings
3516B Generator Set with Dynamic Gas Blending Air Starting Motor Pressure Regulating Valve
PM820, PM822, and PM825 Cold Planer Machine Systems Piston Pump (Hydraulic Fan) - Remove and Install
3516B Generator Set with Dynamic Gas Blending Air Inlet and Exhaust Lines
336, 336 GC and 340 Excavator Systems Pump Control (Output Flow) - Adjust
3516B Generator Set with Dynamic Gas Blending Air Inlet and Exhaust Lines
3516B Generator Set with Dynamic Gas Blending Engine Oil Lines
New E-Stop Contact Blocks Are Now Used on Certain Cat® Engines {1408, 7418} New E-Stop Contact Blocks Are Now Used on Certain Cat® Engines {1408, 7418}