Piston Pump (Hydraulic Fan) - Remove and Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | - | Loctite ® Moly-Paste™ | - |
Start By:
- Remove the fuel priming pump and primary filter.
- Remove the secondary fuel filter base.
- Remove the fumes disposal filters.
- Disconnect harness assemblies (3) and position out of the way. 5Remove clamps (1) and clamp (4). Remove tube assembly (2).
Show/hide table
Illustration 2 g06265912 - Engage lever (5) and rotate seat group (6) out of the way.
Show/hide table
Illustration 3 g06265915 - Open access door (7).
Show/hide table
Illustration 4 g06265925 - Remove two bolts (8) and remove platform (9).
Show/hide table
Illustration 5 g06265931 - Remove two bolts (10) and two clamps (11). Remove four cable straps (12).
- Disconnect hose assembly (13) , hose assembly (14), hose assembly (15) , hose assembly (16), and the O-ring seals. Position the hose assemblies out of the way.
Show/hide table
Illustration 6 g06265957 - Remove four cable straps (21).
- Disconnect harness assembly (17), harness assembly (18), harness assembly (19), harness assembly (20), harness assembly (22), and harness assembly (23). Position the harness assemblies out of the way.
Show/hide table
Illustration 7 g06265967 - Disconnect hose assembly (24), hose assembly (25), hose assembly (26), hose assembly (27), hose assembly (28), hose assembly (29), and remove the O-ring seals.
Show/hide table
Illustration 8 g06265978 - Disconnect harness assembly (30), harness assembly (31), harness assembly (32), harness assembly (33), and remove the O-ring seals. Position the hose assemblies out of the way.
Show/hide table
Illustration 9 g06266009 - Remove bolts (34). Disconnect hose assembly (35) and remove the O-ring seal.
Show/hide table
Illustration 10 g06266013 View from the bottom of the piston pump (fan). - Remove bolts (36). Disconnect hose assembly (37) and remove the O-ring seal.
Show/hide table
Illustration 11 g06266073 - Attach suitable lifting device to piston pump (propel) (38) and piston pump (fan) (39) as an assembly. The combined weight of piston pump (propel) (38) and piston pump (fan) (39) is approximately
103 kg (227 lb) .Show/hide tableIllustration 12 g06266116 - Remove two bolts (40).
Show/hide table
Illustration 13 g06266120 - Pull piston pump (propel) (38) and piston pump (fan) (39) away from the gearbox to free the spline. Remove O-ring seal (41) and discard. Remove piston pump (propel) (38) and piston pump (fan) (39) as an assembly.
Show/hide table
Illustration 14 g06266249 - Remove two bolts (42).
Show/hide table
Illustration 15 g06266126 - Remove piston pump (fan) (39) from piston pump (propel) (38).
Show/hide table
Illustration 1 | g06265895 |
- Install piston pump (fan) (39) in the reverse order of removal.
- Tighten bolts (10) to a torque of
15 ± 3 N·m (133 ± 27 lb in) . - Apply Tooling (A) to the splines of piston pump (propel) (39) prior to installation.
- Apply Tooling (A) to the splines of piston pump (propel) (38) prior to installation.
- Tighten bolts (10) to a torque of
Caterpillar Information System:
3516B Generator Set with Dynamic Gas Blending Air Starting Motor Pressure Regulating Valve
3516B Generator Set with Dynamic Gas Blending Piston and Rings
3516B Generator Set with Dynamic Gas Blending Cylinder Head Valves
3516B Generator Set with Dynamic Gas Blending Cylinder Head
320 D3 Hydraulic Excavators Engine Disassembly and Assembly Cylinder Liner - Remove and Install
XQP1100 Generator Set Generator Bearing - Lubricate
New Engine Software is Now Used for Certain C175 Generator Set Engines {1920} New Engine Software is Now Used for Certain C175 Generator Set Engines {1920}
New Engine Software is Now Used for Certain C175 50Hz Generator Set Engines {1920} New Engine Software is Now Used for Certain C175 50Hz Generator Set Engines {1920}
Cat® Detect Object Detection Hardware Generation 4 for Small Off Highway Trucks, Motor Graders, Large Wheel Loaders, Large Wheel Dozers and Articulated Trucks Product Identification
XQP1100 Generator Set Parallel Operation
Cat® Detect Object Detection Hardware Generation 4 for Small Off Highway Trucks, Motor Graders, Large Wheel Loaders, Large Wheel Dozers and Articulated Trucks Declaration of Conformity
336 Excavators (Powered by C9.3 Tier 4 Engine) Engine Supplement Belt Tensioner - Remove and Install
3516B Generator Set with Dynamic Gas Blending Air Inlet and Exhaust Lines
336, 336 GC and 340 Excavator Systems Pump Control (Output Flow) - Adjust
3516B Generator Set with Dynamic Gas Blending Air Inlet and Exhaust Lines
3516B Generator Set with Dynamic Gas Blending Engine Oil Lines
New E-Stop Contact Blocks Are Now Used on Certain Cat® Engines {1408, 7418} New E-Stop Contact Blocks Are Now Used on Certain Cat® Engines {1408, 7418}
3516B Generator Set with Dynamic Gas Blending Cylinder Block
XQP1100 Generator Set Fuel System Primary Filter (Water Separator) Element - Replace - If equipped
XQP1100 Generator Set Fuel System Primary Filter/Water Separator - Drain - If equipped
XQP1100 Generator Set Fuel System Primary Filter/Water Separator - Drain - If Equipped
XQP1100 Generator Set Declaration of Conformity
List of Caterpillar Service Centers for Napier Turbochargers {0374, 1052, 7513} List of Caterpillar Service Centers for Napier Turbochargers {0374, 1052, 7513}
C7.1 Marine Propulsion Engine Alternator Belt - Remove and Install