C32 Marine Engines Caterpillar

Installation Procedure

Show/hide table

Illustration 1	g03845715

1. Use a suitable lifting device and Tooling (A) to set the aftercooler (18) in place. The weight of aftercooler (18) is approximately 45 kg (100 lb).

2. Install bolt (17).
   Show/hide table

   Illustration 2	g03845713

3. Install bolts (15), connect the hoses, and install hose clamps (16).
   Show/hide table

   Illustration 3	g03845704

4. Install guard (13) and nuts (14)
   Show/hide table

   Illustration 4	g03845692

5. Install bracket (10), nuts (12), and bolt (11).
   Show/hide table

   Illustration 5	g03858775

6. Install nuts (7).

7. Install guard (8) and bolt (9).
   Show/hide table

   Illustration 6	g03849099

8. Install guard (5) and bolts (6).

9. Install the guard (3), the spacers, the washers, and mounts (8).

10. Position harness assemblies (2) and install the cable straps holding harness assemblies (2) to guard (3).

11. Install bolt (4).

12. Fill the coolant system with coolant. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change" for the correct filling procedure.

End By:

1. Install air inlet shut off

2. Install electronic control module