Inspect all material after delivery to the site to ensure no damage to any of the components. If there is any damage to the components, review with the site manager before moving forward with the installation. Document and report all findings.
If the enclosure must be rotated horizontally to transport from the delivery vehicle to the pad, the electronics panel should be on the TOP. Applying pressure to the electronics panel to transport the enclosure could damage electronic components inside. Take care to recognize which side has the electronics panel door before rotating the enclosure from the vertical position. The cells must be kept level and upright at all times during transportation.
The components will be shipped with protective material to prevent scratches to the surfaces of the enclosure. The shipping materials will need to be removed and disposed of properly. Take care not to nick or scrape the protective paint coating on the cabinet. After the equipment is unpacked, review and confirm the material inventory listed.