Gear Group (Front) - Time
Show/hide table
| NOTICE |
|---|
|
If the front housing is not installed, do not turn the crankshaft. Damage to the engine may occur. |
- Align timing mark (2) on idler gear (3) with the timing mark on crankshaft gear (4) and align timing mark (2) on idler gear (3) with the timing mark on camshaft gear (1).
Show/hide table
| |
| Illustration 1 | g00836394 |
Caterpillar Information System:
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Vibratory Shaft Bearing - Lubricate
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Thickness Control - Lubricate
CB-534C Vibratory Compactor Cooling System Water Temperature Regulator - Replace
980G Wheel Loader Power Train Transmission to Torque Converter - Connect
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Logged Event Mode
980G Wheel Loader Power Train Transmission from Torque Converter - Separate
CB-534C and CB-634C Vibratory Compactors Vibratory System Pressure Valve (POR) - Test and Adjust
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Sloper Jack - Lubricate
12H, 140H and 160H Motor Graders Machine Systems Blade Lift Cylinder - Install
CB-534C Vibratory Compactor Cooling System Pressure Cap - Clean/Replace
CB-534C Vibratory Compactor Cooling System Coolant Level - Check
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Height Adjuster - Lubricate
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System Switches
12H, 140H and 160H Motor Graders Machine Systems Sideshift Cylinder - Remove
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Vibratory Shaft and Universal Joint - Lubricate
3054 Engine Air in Fuel - Test
CB-535B Vibratory Compactor Propel System Speed and Direction Control
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel System Pressure - Test
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Walk-Around Inspection
988G Wheel Loader Engine Supplement Engine and Torque Converter - Install
CB-534C Vibratory Compactor Crankshaft Vibration Damper - Inspect
CB-534C Vibratory Compactor Engine Air Filter Primary Element - Clean/Replace
CB-534C Vibratory Compactor Engine Air Filter Secondary Element - Replace
CB-534C Vibratory Compactor Engine Air Filter Service Indicator - Inspect