Thickness Control - Lubricate
Show/hide table
 | |
| Illustration 1 | g00688528 |
Lubricate the fitting for the thickness control on the right side of the machine with one pump of grease. Lubricate the fitting for the thickness control on the left side of the machine with one pump of grease.
Show/hide table
 | |
| Illustration 2 | g00688529 |
Lubricate the trunnion (1) on both sides of the machine with two pumps of grease. Lubricate the threads for the thickness control (2) on both sides of the machine.
Caterpillar Information System:
CB-534C Vibratory Compactor Cooling System Water Temperature Regulator - Replace
980G Wheel Loader Power Train Transmission to Torque Converter - Connect
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Logged Event Mode
980G Wheel Loader Power Train Transmission from Torque Converter - Separate
CB-534C and CB-634C Vibratory Compactors Vibratory System Pressure Valve (POR) - Test and Adjust
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Sloper Jack - Lubricate
12H, 140H and 160H Motor Graders Machine Systems Blade Lift Cylinder - Install
CB-534C Vibratory Compactor Cooling System Pressure Cap - Clean/Replace
CB-534C Vibratory Compactor Cooling System Coolant Level - Check
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Height Adjuster - Lubricate
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Drop Arm - Lubricate
2014/08/20 New Water Pump Group Includes Many Improvements {1361}
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Vibratory Shaft Bearing - Lubricate
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Gear Group (Front) - Time
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System Switches
12H, 140H and 160H Motor Graders Machine Systems Sideshift Cylinder - Remove
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Vibratory Shaft and Universal Joint - Lubricate
3054 Engine Air in Fuel - Test
CB-535B Vibratory Compactor Propel System Speed and Direction Control
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel System Pressure - Test
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Walk-Around Inspection
988G Wheel Loader Engine Supplement Engine and Torque Converter - Install
CB-534C Vibratory Compactor Crankshaft Vibration Damper - Inspect
CB-534C Vibratory Compactor Engine Air Filter Primary Element - Clean/Replace