Vibratory Shaft Bearing - Lubricate
Show/hide table
Illustration 1 | g00688578 |
Show/hide table
Illustration 2 | g00696568 |
Lubricate the four fittings that are located by the crown control with five pumps of grease.
Show/hide table
Illustration 3 | g00688608 |
Lubricate the two fittings that are located by the screed burners with five pumps of grease. There are fittings on both sides of the screed.
Caterpillar Information System:
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Thickness Control - Lubricate
CB-534C Vibratory Compactor Cooling System Water Temperature Regulator - Replace
980G Wheel Loader Power Train Transmission to Torque Converter - Connect
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Logged Event Mode
980G Wheel Loader Power Train Transmission from Torque Converter - Separate
CB-534C and CB-634C Vibratory Compactors Vibratory System Pressure Valve (POR) - Test and Adjust
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Sloper Jack - Lubricate
12H, 140H and 160H Motor Graders Machine Systems Blade Lift Cylinder - Install
CB-534C Vibratory Compactor Cooling System Pressure Cap - Clean/Replace
CB-534C Vibratory Compactor Cooling System Coolant Level - Check
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Height Adjuster - Lubricate
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Drop Arm - Lubricate
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Gear Group (Front) - Time
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System Switches
12H, 140H and 160H Motor Graders Machine Systems Sideshift Cylinder - Remove
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Vibratory Shaft and Universal Joint - Lubricate
3054 Engine Air in Fuel - Test
CB-535B Vibratory Compactor Propel System Speed and Direction Control
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel System Pressure - Test
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Walk-Around Inspection
988G Wheel Loader Engine Supplement Engine and Torque Converter - Install
CB-534C Vibratory Compactor Crankshaft Vibration Damper - Inspect
CB-534C Vibratory Compactor Engine Air Filter Primary Element - Clean/Replace
CB-534C Vibratory Compactor Engine Air Filter Secondary Element - Replace