Engine Air Filter Secondary Element - Replace
Show/hide table
NOTICE |
---|
Always replace the secondary filter element. Never attempt to reuse it by cleaning. The secondary filter element should be replaced at the time the primary element is serviced for the third time. The secondary filter element should also be replaced if the yellow piston in the filter element indicator enters the red zone after installation of a clean primary element, or if the exhaust smoke is still black. |
- The air filter housing is located on the left side of the machine. Open the access door.
Show/hide table
Illustration 1 | g00688674 |
- In order to remove the air cleaner housing cover (1), turn the eyebolts (2) in a counterclockwise direction.
Show/hide table
Illustration 2 | g00590853 |
- Remove the primary filter element (3) .
Show/hide table
Illustration 3 | g00590867 |
- Remove the secondary filter element (4) .
Show/hide table
Illustration 4 | g00590963 |
- Cover the air inlet opening. Clean the inside of the air cleaner housing.
- Uncover the air inlet opening. Install a new secondary element (4) .
- Install the primary element (3) and the air cleaner housing cover (1). Tighten the cover bolts (2) finger tight. Do not use a tool in order to tighten the cover bolts.
- In order to reset the air filter element indicator, push down on the button on top of the indicator.
Show/hide table
Illustration 5 | g00590985 |
- Close the engine compartment access door.
Caterpillar Information System:
CB-534C Vibratory Compactor Engine Air Filter Primary Element - Clean/Replace
CB-534C Vibratory Compactor Crankshaft Vibration Damper - Inspect
988G Wheel Loader Engine Supplement Engine and Torque Converter - Install
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Walk-Around Inspection
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel System Pressure - Test
CB-535B Vibratory Compactor Propel System Speed and Direction Control
3054 Engine Air in Fuel - Test
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Vibratory Shaft and Universal Joint - Lubricate
12H, 140H and 160H Motor Graders Machine Systems Sideshift Cylinder - Remove
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System Switches
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Gear Group (Front) - Time
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Vibratory Shaft Bearing - Lubricate
CB-534C Vibratory Compactor Engine Air Filter Service Indicator - Inspect
CB-534C Vibratory Compactor Engine Mounts - Inspect
CB-534C Vibratory Compactor Engine Valve Rotators - Inspect
CB-534C Vibratory Compactor Oil Filter - Inspect
CB-534C Vibratory Compactor Operator Platform - Lubricate
CB-534C Vibratory Compactor Indicators and Gauges - Test
CB-534C Vibratory Compactor Radiator Core - Clean
CB-534C Vibratory Compactor Ring Bearing - Lubricate
CB-534C Vibratory Compactor Steering Cylinder Ends - Lubricate
CB-534C Vibratory Compactor Steering Pivot Clearance - Adjust
725 and 730 Articulated Trucks Torque Converter Scavenge Screen - Clean
CB-534C Vibratory Compactor Water Spray Nozzles - Clean