Logged Event Mode
记录事件模式将记录超出正常范围而无部件故障的机器工况。 此工况被记为"事件"。
- 进入维修模式。 利用方向键选择第二行。 插图的第三行显示了所记录事件的总数。
Show/hide table
图 1 | g00688506 |
- 显示的第四行指示 "MID : EID"。 MID 是用来识别检测到异常电子控制模块的模块识别代码。 请参阅测试和调整, "激活错误代码"。 EID 是用来识别事件的代码。 此代码可识别各种事件。 请参阅表 1 中的事件说明。
Show/hide table
表 1 事件识别符(EID)     事件     说明     17     冷却液过热     43     蓄电池电量异常(到电源的电压低)     50     蓄电池电量异常(到电源的电压高)     59     冷却液液位不足     95     燃油滤清器堵塞     100     机油压力低     119     燃油油位低     171     机油油位低     179     蓄电池电量异常(充电异常)     232     油水分离器需要放水     235     液压油油位低     236     液压油滤清器堵塞     237     过载警告     272     空气滤清器堵塞     600     液压油过热     862     专用过滤器堵塞     863     自动润滑故障    
Show/hide table
图 2 | g00688645 |
- 要想清除事件,选择第四行后按 "setting(设定)"键。
Show/hide table
图 3 | g00688645 |
- 显示屏显示 "CLEAR?(清除?)" 时,按 "OK(确定)"键。 每次清除一个记录的事件。
Show/hide table
图 4 | g00688824 |
Caterpillar Information System:
980G Wheel Loader Power Train Transmission from Torque Converter - Separate
CB-534C and CB-634C Vibratory Compactors Vibratory System Pressure Valve (POR) - Test and Adjust
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Sloper Jack - Lubricate
12H, 140H and 160H Motor Graders Machine Systems Blade Lift Cylinder - Install
CB-534C Vibratory Compactor Cooling System Pressure Cap - Clean/Replace
CB-534C Vibratory Compactor Cooling System Coolant Level - Check
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Height Adjuster - Lubricate
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Drop Arm - Lubricate
2014/08/20 New Water Pump Group Includes Many Improvements {1361}
12H, 140H and 160H Motor Graders Machine Systems Blade Lift Cylinder - Remove
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Flywheel - Inspect
988G Wheel Loader Engine Supplement Turbocharger - Install - Engine In Chassis
980G Wheel Loader Power Train Transmission to Torque Converter - Connect
CB-534C Vibratory Compactor Cooling System Water Temperature Regulator - Replace
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Thickness Control - Lubricate
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Vibratory Shaft Bearing - Lubricate
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Gear Group (Front) - Time
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System Switches
12H, 140H and 160H Motor Graders Machine Systems Sideshift Cylinder - Remove
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Vibratory Shaft and Universal Joint - Lubricate
3054 Engine Air in Fuel - Test
CB-535B Vibratory Compactor Propel System Speed and Direction Control
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel System Pressure - Test
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Walk-Around Inspection