Sloper Jack - Lubricate
Show/hide table
 | |
| Illustration 1 | g00688477 |
Lubricate the sloper jack on the right side of the machine with two pumps of grease. Lubricate the sloper jack on the left side of the machine with two pumps of grease.
Caterpillar Information System:
12H, 140H and 160H Motor Graders Machine Systems Blade Lift Cylinder - Install
CB-534C Vibratory Compactor Cooling System Pressure Cap - Clean/Replace
CB-534C Vibratory Compactor Cooling System Coolant Level - Check
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Height Adjuster - Lubricate
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Drop Arm - Lubricate
2014/08/20 New Water Pump Group Includes Many Improvements {1361}
12H, 140H and 160H Motor Graders Machine Systems Blade Lift Cylinder - Remove
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Flywheel - Inspect
988G Wheel Loader Engine Supplement Turbocharger - Install - Engine In Chassis
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Engine Oil in Exhaust System
TH103 Telehandler Hydraulic System Telescoping Cylinder
TH103 Telehandler Hydraulic System Telescoping Boom and Boom Chain
CB-534C and CB-634C Vibratory Compactors Vibratory System Pressure Valve (POR) - Test and Adjust
980G Wheel Loader Power Train Transmission from Torque Converter - Separate
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Logged Event Mode
980G Wheel Loader Power Train Transmission to Torque Converter - Connect
CB-534C Vibratory Compactor Cooling System Water Temperature Regulator - Replace
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Thickness Control - Lubricate
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Vibratory Shaft Bearing - Lubricate
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Gear Group (Front) - Time
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System Switches
12H, 140H and 160H Motor Graders Machine Systems Sideshift Cylinder - Remove
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Vibratory Shaft and Universal Joint - Lubricate
3054 Engine Air in Fuel - Test