Axle Oil Cooler - Assemble
组装步骤
- 安装芯组件 (20) 和四条螺栓 (19) 。
Show/hide table
 | |
| 图 1 | g00687021 |
- 安装管组件 (17) 和 (18) 。
Show/hide table
 | |
| 图 2 | g00687020 |
- 安装滤清器底座 (15) 和螺栓 (14) 。
Show/hide table
 | |
| 图 3 | g01147434 |
- 安装新油滤清器 (13) 。 利用干净的液压油润滑滤清器的唇缘。
Show/hide table
 | |
| 图 4 | g00687057 |
- 安装管组件 (16) 。
- 对其余油滤清器重复步骤 3 和 4。
- 安装风扇驱动马达 (12) 和螺栓 (11) 。
Show/hide table
 | |
| 图 5 | g00686969 |
- 安装轮毂 (10) 和螺栓 (9) 。
Show/hide table
 | |
| 图 6 | g00686968 |
- 安装风扇组件 (8) 和螺栓 (7) 。
Show/hide table
 | |
| 图 7 | g00686967 |
- 安装风扇和护罩组件 (6) 以及螺栓 (5) 。 拧紧螺栓 (5) 至扭矩为 38 ± 4 N·m (28 ± 3 lb ft)。
Show/hide table
 | |
| 图 8 | g00686965 |
- 安装管组件 (2) 和 (3) 。
Show/hide table
 | |
| 图 9 | g00686964 |
- 安装管组件 (1) 。 安装螺栓 (4) 和卡箍。
End By: 安装车桥油冷却器。 请参阅 拆解和装配, "车桥油冷却器 - 安装"。
Caterpillar Information System:
TH103 Telehandler Hydraulic System Joystick Control
2000/03/20 An Improved Ball Stud Is Now Used for the Gas Spring on the Armrest {7307, 7312}
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Using Service Mode
988G Wheel Loader Power Train Axle Oil Cooler - Disassemble
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Initial Troubleshooting Procedure
550 Wheel Harvester, 570 Wheel Harvester and 580 Wheel Harvester Power Train Hydrostatic Drive System Performance - Test
988G Wheel Loader Power Train Axle Oil Cooler - Install
988G Wheel Loader Power Train Axle Oil Cooler - Remove
2000/03/27 Correction to Service Magazine, SEPD0432 , "Improved Transmission Downshift Switch Now Used" {5063, 7332}
CB-534C Vibratory Compactor Towing the Machine
2000/05/08 Stops Have Now Been Added To The Crankcase Guard. {7151}
988G Wheel Loader Power Train Service Brake - Assemble
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks E015 High Engine Coolant Temperature Derate
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks E025 High Inlet Air Temperature Derate
325D and 329D Excavators Fuel Tank Cap and Strainer - Clean
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders MID 036 - CID 0298 - FMI 02 Incorrect Service Brake Pedal Switch inputs
2000/03/20 Changes to Operation and Maintenance Manuals, SEBU7207 and SEBU7255 {3261, 7000}
988G Wheel Loader Braking System Service Braking System Pressure - Test
834G Wheel Dozer and 836G Landfill Compactor Braking System Service Brakes - Test
988G Wheel Loader Power Train Final Drive, Brake and Wheel - Install
2000/03/20 Improved Exhaust Manifolds {1059}
988G Wheel Loader Power Train Final Drive Spindle - Disassemble
988G Wheel Loader Power Train Final Drive Spindle - Assemble
988G Wheel Loader Power Train Final Drive and Wheel - Disassemble