An Improved Ball Stud Is Now Used for the Gas Spring on the Armrest {7307, 7312}
- Skid Steer Loader:
- 216 (PIN: 4NZ)
- 226 (PIN: 5FZ)
- 236 (PIN: 4YZ)
- 246 (PIN: 5SZ)
Description of Change: An improved ball stud is now used for the gas spring on the armrest. The improved ball stud provides increased thread engagement to the bracket assembly, which provides a more durable mounting for the gas spring. The improved ball stud is part of the 142-9276 Armrest.
Adaptable To: The new 130-1916 Ball Stud (1) is a direct replacement for the former 8T-2444 Ball Stud. The new ball stud is effective with the 216 (PIN: 4NZ1-433), 226 (PIN: 5FZ1-1042), 236 (PIN: 4YZ1-424) and 246 (PIN: 5SZ1-378) Skid Steer Loaders. The new ball stud is adaptable to all earlier machines. See Illustration 1.
Show/hide table
 | |
| Illustration 1 | g00687043 |
Partial view of the 142-9276 Armrest that shows the location of the 130-1916 Ball Stud (1) | |
Caterpillar Information System:
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Using Service Mode
988G Wheel Loader Power Train Axle Oil Cooler - Disassemble
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Initial Troubleshooting Procedure
550 Wheel Harvester, 570 Wheel Harvester and 580 Wheel Harvester Power Train Hydrostatic Drive System Performance - Test
988G Wheel Loader Power Train Axle Oil Cooler - Install
988G Wheel Loader Power Train Axle Oil Cooler - Remove
2000/03/27 Correction to Service Magazine, SEPD0432 , "Improved Transmission Downshift Switch Now Used" {5063, 7332}
CB-534C Vibratory Compactor Towing the Machine
2000/05/08 Stops Have Now Been Added To The Crankcase Guard. {7151}
988G Wheel Loader Power Train Service Brake - Assemble
988G Wheel Loader Power Train Service Brake - Disassemble
CB-535B Vibratory Compactor Propel System Piston Pump (Propel)
TH103 Telehandler Hydraulic System Joystick Control
988G Wheel Loader Power Train Axle Oil Cooler - Assemble
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks E015 High Engine Coolant Temperature Derate
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks E025 High Inlet Air Temperature Derate
325D and 329D Excavators Fuel Tank Cap and Strainer - Clean
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders MID 036 - CID 0298 - FMI 02 Incorrect Service Brake Pedal Switch inputs
2000/03/20 Changes to Operation and Maintenance Manuals, SEBU7207 and SEBU7255 {3261, 7000}
988G Wheel Loader Braking System Service Braking System Pressure - Test
834G Wheel Dozer and 836G Landfill Compactor Braking System Service Brakes - Test
988G Wheel Loader Power Train Final Drive, Brake and Wheel - Install
2000/03/20 Improved Exhaust Manifolds {1059}
988G Wheel Loader Power Train Final Drive Spindle - Disassemble