Final Drive, Brake and Wheel - Install
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 4C-6486 | Stand | 2 |
8S-7615 | Pin | 2 | |
8S-8048 | Saddle | 2 | |
8S-7611 | Tube | 2 | |
B | 138-7574 | Link Bracket | 2 |
- Install O-ring seal (7) on the brake port.
- Install O-ring seal (6) on brake piston assembly (5).
Show/hide table
Illustration 2 g00686641 - Install brake piston assembly (5).
- Install three bolts (4) and the washers that retain brake piston assembly (5). The torque for the bolts is
100 ± 20 N·m (74 ± 15 lb ft) .Show/hide tableIllustration 3 g00686639 - Install O-ring seal (3).
Show/hide table
Illustration 4 g00686638 Show/hide tableIllustration 5 g00686636 - Install Tooling (B) to the wheel, as shown.
- Attach a suitable hoist and lifting slings to Tooling (B) and final drive, brake and wheel (1), as shown.
- Use the hoist in order to install the final drive, brake and wheel (1) to the axle assembly. The weight of final drive, brake and wheel (1) is
770 kg (1700 lb) . - Install bolts (2). The torque for the bolts (2) is
1000 ± 125 N·m (740 ± 90 lb ft) .
Show/hide table
Illustration 1 | g00686642 |
End By:
- Install the axle shaft. Refer to Disassembly and Assembly, "Axle Shaft - Remove and Install" for the machine that is being serviced.
- Install the compactor wheels to the 836G. Refer to Disassembly and Assembly, "Compactor Wheel - Install".
- Install the front tires and rims to the 988G and 834G. Refer to Disassembly and Assembly, "Tire and Rim (Front) - Install".
- Install the rear tires and rims to the 988G and 834G. Refer to Disassembly and Assembly, "Tire and Rim (Rear) - Install".
Caterpillar Information System:
834G Wheel Dozer and 836G Landfill Compactor Braking System Service Brakes - Test
988G Wheel Loader Braking System Service Braking System Pressure - Test
2000/03/20 Changes to Operation and Maintenance Manuals, SEBU7207 and SEBU7255 {3261, 7000}
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders MID 036 - CID 0298 - FMI 02 Incorrect Service Brake Pedal Switch inputs
325D and 329D Excavators Fuel Tank Cap and Strainer - Clean
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks E025 High Inlet Air Temperature Derate
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks E015 High Engine Coolant Temperature Derate
988G Wheel Loader Power Train Axle Oil Cooler - Assemble
TH103 Telehandler Hydraulic System Joystick Control
2000/03/20 An Improved Ball Stud Is Now Used for the Gas Spring on the Armrest {7307, 7312}
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Using Service Mode
988G Wheel Loader Power Train Axle Oil Cooler - Disassemble
2000/03/20 Improved Exhaust Manifolds {1059}
988G Wheel Loader Power Train Final Drive Spindle - Disassemble
988G Wheel Loader Power Train Final Drive Spindle - Assemble
988G Wheel Loader Power Train Final Drive and Wheel - Disassemble
320C Excavator Hydraulic System Pump Control (Main Hydraulic) - Main Pump Regulator
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders MID 036 - CID 0548 - FMI 05 Throttle Lock Lamp open circuit
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders MID 036 - CID 0548 - FMI 06 Throttle Lock Lamp short
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders MID 036 - CID 0650 - FMI 12 Harness Code invalid
2000/03/13 New Pump Drives with An Improved Seal Are Now Available {3108}
988G Wheel Loader Power Train Final Drive and Wheel - Assemble
3524B Engines for 797 and 797B Off-Highway Trucks General Information (Fuel System) - Diesel
14H Motor Grader Ether Starting Aid Cylinder - Replace