Axle Oil Cooler - Disassemble
拆解步骤
开始:
- 拆下车轴 请参阅拆解和装配, "车桥油冷却器 - 拆卸"。
注: 清洁度是一项重要的因素。 拆解步骤开始之前，应彻底清洁部件外部。 这有助于防止尘土进入内部结构。
Show/hide table
| 注意 |
|---|
在检验、保养、测试、调整及维修产品时，务必留心，确保液体盛装在容器中。 在打开任何腔室或拆解任何储有液体的部件之前，要准备好用合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上液体的工具及用品，参考专门出版物, NENG2500, "卡特彼勒工具和修理车间设备指南"。 按照当地法规和指令处置所有液体。 |
- 拆卸螺栓 (4) 和卡箍。 拆下管组件 (1) 。
Show/hide table
 | |
| 图 1 | g00686964 |
- 拆下管组件 (2) 和 (3) 。
- 拆下螺栓 (5) 以及风扇和护罩组件 (6) 。
Show/hide table
 | |
| 图 2 | g00686965 |
- 拆下螺栓 (7) 和风扇组件 (8) 。
Show/hide table
 | |
| 图 3 | g00686967 |
- 拆下螺栓 (9) 和轮毂 (10) 。
Show/hide table
 | |
| 图 4 | g00686968 |
- 拆下螺栓 (11) 和风扇驱动马达 (12) 。
Show/hide table
 | |
| 图 5 | g00686969 |
- 拆下机油滤清器 (13) 。
Show/hide table
 | |
| 图 6 | g01153673 |
- 拆下螺栓 (14) 和滤清器底座 (15) 。
Show/hide table
 | |
| 图 7 | g01147434 |
- 拆下管组件 (16) 。
Show/hide table
 | |
| 图 8 | g00686975 |
- 对其余油滤清器重复步骤 7 和 8。
- 拆下管组件 (17) 和 (18) 。
Show/hide table
 | |
| 图 9 | g00687020 |
- 拆下螺栓 (19) 和芯组件 (20) 。
Show/hide table
 | |
| 图 10 | g00687021 |
Caterpillar Information System:
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Initial Troubleshooting Procedure
550 Wheel Harvester, 570 Wheel Harvester and 580 Wheel Harvester Power Train Hydrostatic Drive System Performance - Test
988G Wheel Loader Power Train Axle Oil Cooler - Install
988G Wheel Loader Power Train Axle Oil Cooler - Remove
2000/03/27 Correction to Service Magazine, SEPD0432 , "Improved Transmission Downshift Switch Now Used" {5063, 7332}
CB-534C Vibratory Compactor Towing the Machine
2000/05/08 Stops Have Now Been Added To The Crankcase Guard. {7151}
988G Wheel Loader Power Train Service Brake - Assemble
988G Wheel Loader Power Train Service Brake - Disassemble
CB-535B Vibratory Compactor Propel System Piston Pump (Propel)
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Thickness Control Screw Adjustment
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Main Frame Extension Installation
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Using Service Mode
2000/03/20 An Improved Ball Stud Is Now Used for the Gas Spring on the Armrest {7307, 7312}
TH103 Telehandler Hydraulic System Joystick Control
988G Wheel Loader Power Train Axle Oil Cooler - Assemble
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks E015 High Engine Coolant Temperature Derate
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks E025 High Inlet Air Temperature Derate
325D and 329D Excavators Fuel Tank Cap and Strainer - Clean
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders MID 036 - CID 0298 - FMI 02 Incorrect Service Brake Pedal Switch inputs
2000/03/20 Changes to Operation and Maintenance Manuals, SEBU7207 and SEBU7255 {3261, 7000}
988G Wheel Loader Braking System Service Braking System Pressure - Test
834G Wheel Dozer and 836G Landfill Compactor Braking System Service Brakes - Test
988G Wheel Loader Power Train Final Drive, Brake and Wheel - Install