Final Drive Spindle - Assemble
- Apply clean final drive oil on all wear plates (2) and on all friction discs (4).
- Install one wear plate (2) first. Install one friction disc (4). Repeat this procedure until four wear plates and four friction discs have been installed in alternating order.
Show/hide table
Illustration 3 g00687220 - Install hub (3).
Show/hide table
Illustration 4 g00687219 - Install one final wear plate (2). Install retaining ring (1).
Show/hide table
| |
| Illustration 1 | g00687222 |
Show/hide table
| |
| Illustration 2 | g00687221 |
End By:
- Install the final drive and brake assemblies to the machine. Refer to Disassembly and Assembly, "Final Drive, Brake and Wheel - Install".
Caterpillar Information System:
988G Wheel Loader Power Train Final Drive Spindle - Disassemble
2000/03/20 Improved Exhaust Manifolds {1059}
988G Wheel Loader Power Train Final Drive, Brake and Wheel - Install
834G Wheel Dozer and 836G Landfill Compactor Braking System Service Brakes - Test
988G Wheel Loader Braking System Service Braking System Pressure - Test
2000/03/20 Changes to Operation and Maintenance Manuals, SEBU7207 and SEBU7255 {3261, 7000}
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders MID 036 - CID 0298 - FMI 02 Incorrect Service Brake Pedal Switch inputs
325D and 329D Excavators Fuel Tank Cap and Strainer - Clean
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks E025 High Inlet Air Temperature Derate
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks E015 High Engine Coolant Temperature Derate
988G Wheel Loader Power Train Axle Oil Cooler - Assemble
TH103 Telehandler Hydraulic System Joystick Control
988G Wheel Loader Power Train Final Drive and Wheel - Disassemble
320C Excavator Hydraulic System Pump Control (Main Hydraulic) - Main Pump Regulator
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders MID 036 - CID 0548 - FMI 05 Throttle Lock Lamp open circuit
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders MID 036 - CID 0548 - FMI 06 Throttle Lock Lamp short
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders MID 036 - CID 0650 - FMI 12 Harness Code invalid
2000/03/13 New Pump Drives with An Improved Seal Are Now Available {3108}
988G Wheel Loader Power Train Final Drive and Wheel - Assemble
3524B Engines for 797 and 797B Off-Highway Trucks General Information (Fuel System) - Diesel
14H Motor Grader Ether Starting Aid Cylinder - Replace
3054 Engine Compression - Test
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Beginning to Pave
140H and 160H Motor Graders Ether Starting Aid Cylinder - Replace