Wheel and Tire
Show/hide table
 | |
| Illustration 1 | g00685450 |
(1) Torque for the sixteen wheel nuts ... 470 ± 50 N·m (350 ± 38 lb ft)
Caterpillar Information System:
2006/03/27 The Differential and Bevel Gear Group Has Been Updated {3251, 3258}
140H and 160H Motor Graders Cutting Edges and End Bits - Inspect/Replace
725 and 730 Articulated Trucks Hoist, Steering, and Brake System Oil Level - Check
988G Wheel Loader Power Train Differential and Bevel Gear - Assemble
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Senders
3408E and 3412E Engines for Caterpillar Built Machines Camshaft Bearings - Remove
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Sensors
AP-1000B and BG-260C Asphalt Pavers Auxiliary System Shutoff Valve (Ventilation System)
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Cut Off Shoe Installation
550 Wheel Harvester, 570 Wheel Harvester and 580 Wheel Harvester Power Train Traction Control System
CB-535B Vibratory Compactor Vibratory System Relief Valve (Pressure Override) - Test and Adjust
725 and 730 Articulated Trucks Hoist, Steering, and Brake System Breather - Inspect/Replace
725 and 730 Articulated Trucks Fuses - Replace
216, 226 and 228 Skid Steer Loaders Engine Supplement Muffler - Remove and Install
120H Motor Grader Cutting Edges and End Bits - Inspect/Replace
3408E and 3412E Engines for Caterpillar Built Machines Camshaft Bearings - Install
797 Off-Highway Truck Power Train Transmission Hydraulic Control - Assemble
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Screed Plate Adjustment
CB-634C Vibratory Compactor Changing Engine Speed
2000/03/20 Corrections to the Power Train Disassembly and Assembly Module, SENR1217, Power Train Disassembly and Assembly Module, SENR5976-01, Power Train Disassembly and Assembly Module, SENR5995-01, Power Train Disassembly and Assembly Module, SENR6706-01, Po
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Related Components
216, 226 and 228 Skid Steer Loaders Engine Supplement Electric Starting Motor - Remove and Install - 228 Skid Steer Loader
16H Motor Grader Cutting Edges and End Bits - Inspect/Replace
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Governor Actuator Control