Cutting Edges and End Bits - Inspect/Replace
Show/hide table
Cedera diri atau kematian dapat terjadi dari jatuhnya blade. Ganjal bladenya sebelum mengganti tip blade. |
Cutting edges dan/atau end bits mungkin rusak atau cutting edges dan/atau end bits mungkin aus berlebihan. Ganti cutting edges dan/atau end bits, sebagaimana diperlukan.
- Tepatkan ganjal dibawah blade. Turunkan blade diatas ganjal. Jangan mengganjal blade terlalu tinggi. Gunakan cukup ganjal agar end bits dan cutting edges dapat dilepaskan.
- Lepaskan cutting edge dan/atau end bitsnya.
Show/hide table
Ilustrasi 1 | g00685571 |
- Pasangkan cutting edges dan/atau end bits yang baru.
- Angkat blade dan singkirkan ganjalnya.
Caterpillar Information System:
216, 226 and 228 Skid Steer Loaders Engine Supplement Electric Starting Motor - Remove and Install - 228 Skid Steer Loader
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Related Components
2000/03/20 Corrections to the Power Train Disassembly and Assembly Module, SENR1217, Power Train Disassembly and Assembly Module, SENR5976-01, Power Train Disassembly and Assembly Module, SENR5995-01, Power Train Disassembly and Assembly Module, SENR6706-01, Po
CB-634C Vibratory Compactor Changing Engine Speed
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Screed Plate Adjustment
797 Off-Highway Truck Power Train Transmission Hydraulic Control - Assemble
3408E and 3412E Engines for Caterpillar Built Machines Camshaft Bearings - Install
120H Motor Grader Cutting Edges and End Bits - Inspect/Replace
216, 226 and 228 Skid Steer Loaders Engine Supplement Muffler - Remove and Install
725 and 730 Articulated Trucks Fuses - Replace
CS-431C, CP-433C and CS-433C Vibratory Compactors Propel System Wheel and Tire
2006/03/27 The Differential and Bevel Gear Group Has Been Updated {3251, 3258}
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Governor Actuator Control
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Deflector Plate Adjustment
2000/03/06 The End Of Control Cable For Implement Valve Has Serviceable Parts {5051}
2000/03/06 The VIMSpc99 Version 1.1.7 Software Update Is Now Available {7601}
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Solenoid Valves
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Cut Off Shoes
16H Motor Grader Drawbar Ball and Socket - Lubricate
D8R Series II Track-Type Tractor Engine Valve Rotators - Inspect
140H and 160H Motor Graders Drawbar Ball and Socket - Lubricate
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders Permanent Timing Calibration Sensor
C-12, C-15 and C-16 Engines for Caterpillar Built Machines CID 0001 FMI 11 Injector Cylinder #1 fault
120H Motor Grader Drawbar Ball and Socket - Lubricate