The End Of Control Cable For Implement Valve Has Serviceable Parts {5051}
- Agricultural Tractors:
- Challenger 35 (PIN: 8DN1-UP; 8RD1-UP; ADK1-UP)
- Challenger 45 (PIN: 1DR1-UP; ABF1-UP; 3BK1-UP)
- Challenger 55 (PIN: 7DM1-UP; 6NN1-UP; AEN1-UP)
Service parts are available to service the cable end of the control cable to the implement control valve. In order to identify the parts, use Illustration 1 and Table 1.
Show/hide table
Illustration 1 | g00685645 |
Show/hide table
Required Parts     | |||
Item     | Part Number     | Description     | Qty     |
1     | 8H-0707 (1)     | Bolt     | 2     |
2     | 3B-4504 (1)     | Lockwasher (6.35 mm (0.250 inch) THK)     | 2     |
3     | 4B-4276 (1)     | Washer     | 2     |
4     | 6F-0612 (1)     | Jam Nut     | 1     |
5     | 8C-3347 (1)     | Roll Pin     | 1     |
6     | 173-9991 (1)     | Clevis     | 1     |
7     | 173-9992     | Flange     | 1     |
8     | 173-9993     | Sleeve     | 1     |
9     | 107-5591     | Jam Nut     | 1     |
Show/hide table
( 1 ) | Part of 113-5668 Bonnet Kit |
Caterpillar Information System:
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Deflector Plate Adjustment
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Governor Actuator Control
16H Motor Grader Cutting Edges and End Bits - Inspect/Replace
216, 226 and 228 Skid Steer Loaders Engine Supplement Electric Starting Motor - Remove and Install - 228 Skid Steer Loader
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Related Components
2000/03/20 Corrections to the Power Train Disassembly and Assembly Module, SENR1217, Power Train Disassembly and Assembly Module, SENR5976-01, Power Train Disassembly and Assembly Module, SENR5995-01, Power Train Disassembly and Assembly Module, SENR6706-01, Po
CB-634C Vibratory Compactor Changing Engine Speed
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Screed Plate Adjustment
797 Off-Highway Truck Power Train Transmission Hydraulic Control - Assemble
3408E and 3412E Engines for Caterpillar Built Machines Camshaft Bearings - Install
120H Motor Grader Cutting Edges and End Bits - Inspect/Replace
216, 226 and 228 Skid Steer Loaders Engine Supplement Muffler - Remove and Install
2000/03/06 The VIMSpc99 Version 1.1.7 Software Update Is Now Available {7601}
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Solenoid Valves
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Cut Off Shoes
16H Motor Grader Drawbar Ball and Socket - Lubricate
D8R Series II Track-Type Tractor Engine Valve Rotators - Inspect
140H and 160H Motor Graders Drawbar Ball and Socket - Lubricate
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders Permanent Timing Calibration Sensor
C-12, C-15 and C-16 Engines for Caterpillar Built Machines CID 0001 FMI 11 Injector Cylinder #1 fault
120H Motor Grader Drawbar Ball and Socket - Lubricate
TK1051 Track Feller Buncher Air Conditioner/Cab Heater Filter (Recirculation) - Inspect/Replace
228 and 248 Skid Steer Loaders Machine Systems Line Relief Valve - Test and Adjust
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Adjustments While Paving