Engine Valve Rotators - Inspect
Show/hide table
 |
|
Sewaktu melakukan pemeriksaan rotator valve, kacamata pelindung atau masker pelindung serta pakaian pelindung harus dikenakan untuk mencegah luka bakar akibat oli panas atau percikan. |
Show/hide table
|
|
Bahaya sengatan listrik. Sistem unit injektor elektronik menggunakan tegangan 90-120 volt. |
Show/hide table
| |
| Ilustrasi 1 | g01372247 |
- Starter engine. Operasikan engine pada putaran idle rendah.
Show/hide table
Ilustrasi 2 g00038585 - Perhatikan permukaan bagian atas dari setiap rotator katup. Setiap kali katup masuk atau katup buang tertutup, setiap rotator katup akan berputar.
- Jika rotator katup tidak berputar, hubungi dealer Caterpillar untuk servis.
Catatan: Caterpillar merekomendasikan untuk mengganti rotator katup yang tidak beroperasi dengan baik. Rotator katup yang tidak beroperasi dengan baik akan mempersingkat usia pakai katup karena katup menjadi cepat aus.
Catatan: Jika rotator katup yang rusak tidak diganti, beberapa permukaan katup dapat terbakar. Partikel logam dari katup dapat jatuh mengenai silinder. Ini dapat menyebabkan kerusakan pada kepala piston dan kepala silinder.
Caterpillar Information System:
16H Motor Grader Drawbar Ball and Socket - Lubricate
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Cut Off Shoes
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Solenoid Valves
2000/03/06 The VIMSpc99 Version 1.1.7 Software Update Is Now Available {7601}
2000/03/06 The End Of Control Cable For Implement Valve Has Serviceable Parts {5051}
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Deflector Plate Adjustment
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Governor Actuator Control
16H Motor Grader Cutting Edges and End Bits - Inspect/Replace
216, 226 and 228 Skid Steer Loaders Engine Supplement Electric Starting Motor - Remove and Install - 228 Skid Steer Loader
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Related Components
2000/03/20 Corrections to the Power Train Disassembly and Assembly Module, SENR1217, Power Train Disassembly and Assembly Module, SENR5976-01, Power Train Disassembly and Assembly Module, SENR5995-01, Power Train Disassembly and Assembly Module, SENR6706-01, Po
CB-634C Vibratory Compactor Changing Engine Speed
140H and 160H Motor Graders Drawbar Ball and Socket - Lubricate
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders Permanent Timing Calibration Sensor
C-12, C-15 and C-16 Engines for Caterpillar Built Machines CID 0001 FMI 11 Injector Cylinder #1 fault
120H Motor Grader Drawbar Ball and Socket - Lubricate
TK1051 Track Feller Buncher Air Conditioner/Cab Heater Filter (Recirculation) - Inspect/Replace
228 and 248 Skid Steer Loaders Machine Systems Line Relief Valve - Test and Adjust
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Adjustments While Paving
TH103 Telehandler Hydraulic System Main Hydraulic System
C-12, C-15 and C-16 Engines for Caterpillar Built Machines CID 0002 FMI 11 Injector Cylinder #2 fault
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Auger Extension Installation
2000/04/10 New Protective Plates are Used on Harvester Heads {6320}
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Screed Extensions