312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Caterpillar


Governor Actuator Control

Usage:

322C ADX



图 1g00685478

调速器执行器

注: 325C、 M325C MH 和 330C 没有调速器执行器。

操作员通过将发动机转速旋钮置于 10 个位置之一选择发动机转速。 控制器通过比较发动机转速和发动机转速传感器,确定发动机是否在选定的转速下工作。 如果发动机不在选定转速下工作,则控制器启动用来移动调速器杆的调速器执行器。 控制器借助调速器反馈传感器将调速器杆置于与选定发动机转速对应的位置处。 调速器执行器利用钢丝绳转动皮带轮。 如果皮带轮逆时针转动,则与皮带轮相连的调速器杆将沿加速方向移动。 如果皮带轮顺时针转动,则调速器杆将沿减速方向移动。

Caterpillar Information System:

16H Motor Grader Cutting Edges and End Bits - Inspect/Replace
216, 226 and 228 Skid Steer Loaders Engine Supplement Electric Starting Motor - Remove and Install - 228 Skid Steer Loader
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Related Components
2000/03/20 Corrections to the Power Train Disassembly and Assembly Module, SENR1217, Power Train Disassembly and Assembly Module, SENR5976-01, Power Train Disassembly and Assembly Module, SENR5995-01, Power Train Disassembly and Assembly Module, SENR6706-01, Po
CB-634C Vibratory Compactor Changing Engine Speed
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Screed Plate Adjustment
797 Off-Highway Truck Power Train Transmission Hydraulic Control - Assemble
3408E and 3412E Engines for Caterpillar Built Machines Camshaft Bearings - Install
120H Motor Grader Cutting Edges and End Bits - Inspect/Replace
216, 226 and 228 Skid Steer Loaders Engine Supplement Muffler - Remove and Install
725 and 730 Articulated Trucks Fuses - Replace
CS-431C, CP-433C and CS-433C Vibratory Compactors Propel System Wheel and Tire
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Deflector Plate Adjustment
2000/03/06 The End Of Control Cable For Implement Valve Has Serviceable Parts {5051}
2000/03/06 The VIMSpc99 Version 1.1.7 Software Update Is Now Available {7601}
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Solenoid Valves
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Cut Off Shoes
16H Motor Grader Drawbar Ball and Socket - Lubricate
D8R Series II Track-Type Tractor Engine Valve Rotators - Inspect
140H and 160H Motor Graders Drawbar Ball and Socket - Lubricate
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders Permanent Timing Calibration Sensor
C-12, C-15 and C-16 Engines for Caterpillar Built Machines CID 0001 FMI 11 Injector Cylinder #1 fault
120H Motor Grader Drawbar Ball and Socket - Lubricate
TK1051 Track Feller Buncher Air Conditioner/Cab Heater Filter (Recirculation) - Inspect/Replace
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.