Senders
燃油油位发送器
Show/hide table
图 1 | g00685266 |
燃油油位发送器 |
燃油油位发送器连接至燃油箱中的浮子。 随着燃油油位的变化,燃油箱内的浮子将会移动。 浮子的移动将改变发送器的电阻。 控制器的电压将随着发送器电阻的变化而变化。 控制器将监控此电压并将此电压与已知的值进行比较。 此比较将确定油箱中燃油的油位。
温度发送器
Show/hide table
图 2 | g00020687 |
发动机冷却液
发送器的电阻随冷却液温度的变化而变化。 控制器的电压将随着发送器电阻的变化而变化。 控制器将监控此电压并将此电压与已知的值进行比较。 此比较将确定冷却液的温度。
液压油
发送器的电阻随油液温度的变化而变化。 控制器的电压将随着发送器电阻的变化而变化。 控制器将监控此电压并将此电压与已知的值进行比较。 该比较将确定液压油的温度。
Caterpillar Information System:
3408E and 3412E Engines for Caterpillar Built Machines Camshaft Bearings - Remove
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Sensors
AP-1000B and BG-260C Asphalt Pavers Auxiliary System Shutoff Valve (Ventilation System)
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Cut Off Shoe Installation
550 Wheel Harvester, 570 Wheel Harvester and 580 Wheel Harvester Power Train Traction Control System
CB-535B Vibratory Compactor Vibratory System Relief Valve (Pressure Override) - Test and Adjust
725 and 730 Articulated Trucks Hoist, Steering, and Brake System Breather - Inspect/Replace
2000/03/13 Serviceable Parts of the Fuel Injection Pump {1251, 1251}
988G Wheel Loader Power Train Differential and Bevel Gear - Install - Rear
824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Hydraulic System Vane Pump (Implement)
2000/05/01 New Axle Housings Increase the Parts' Commonality {3259, 3260, 3278}
725 and 730 Articulated Trucks Oscillating Hitch - Lubricate
988G Wheel Loader Power Train Differential and Bevel Gear - Assemble
725 and 730 Articulated Trucks Hoist, Steering, and Brake System Oil Level - Check
140H and 160H Motor Graders Cutting Edges and End Bits - Inspect/Replace
2006/03/27 The Differential and Bevel Gear Group Has Been Updated {3251, 3258}
CS-431C, CP-433C and CS-433C Vibratory Compactors Propel System Wheel and Tire
725 and 730 Articulated Trucks Fuses - Replace
216, 226 and 228 Skid Steer Loaders Engine Supplement Muffler - Remove and Install
120H Motor Grader Cutting Edges and End Bits - Inspect/Replace
3408E and 3412E Engines for Caterpillar Built Machines Camshaft Bearings - Install
797 Off-Highway Truck Power Train Transmission Hydraulic Control - Assemble
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Screed Plate Adjustment
CB-634C Vibratory Compactor Changing Engine Speed