New Axle Housings Increase the Parts' Commonality {3259, 3260, 3278}
- Backhoe Loader:
- 416 (PIN: 5PC)
- 426 (PIN: 7BC)
- 428 (PIN: 6TC)
- 436 (PIN: 5KF)
- 438 (PIN: 3DJ)
- 446 PS (PIN: 6XF)
The housings for the axles have been improved in order to increase the parts' commonality. See Table 1 for the changes. If a former housing must be replaced, a new housing is required.
Note: You must install a 118-5837 Shaft As and a 118-5839 Rear Axle Seal in a new housing.
The diameter of the new shaft is larger in order to increase the service life of the axle. The former seal was replaced with a cartridge seal. The installation of the seal will be easier.
Show/hide table
Changes to Axles     | ||||
Part Number of the Axle     | Former Housing Assembly     | Part Number of the New Housing Assembly     | New Part Number of the Axle     | |
Part Number | Side     | |||
9R-0473     | 9R-2415     | Left     | 144-7233     | 9R-5224     |
9R-2416 | Right     | 144-4623     | 9R-5230     | |
9R-5224     | 9R-5980     | Left     | 183-2563 (1)     | 9R-6692     |
9R-5981 | Right     | 183-2564 (1)     | ||
9R-5230     | 9R-5980     | Left     | 183-2563 (1)     | 9R-6693     |
9R-5981 | Right     | 183-2564 (1)     | ||
9R-6692     | 9R-5980     | Left     | 183-2563 (1)     | -     |
9R-5981 | Right     | 183-2564 (1)     | ||
9R-6693     | 9R-5980     | Left     | 183-2563 (1)     | -     |
9R-5981 | Right     | 183-2564 (1)     |
Show/hide table
( 1 ) | You must install the following parts: a 118-5837 Shaft As and the 118-5839 Rear Axle Seal |
Caterpillar Information System:
725 and 730 Articulated Trucks Oscillating Hitch - Lubricate
Installation of the 172-9321 Metering Pump for the Steering System{4312} Installation of the 172-9321 Metering Pump for the Steering System{4312}
784C, 785B, 785C, 785D, 789B, 789C, 789D, 793B, 793C, 793D, 797 and 797B Off-Highway Trucks VIMS ™ Switch Circuits
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Before Paving Setup
2000/03/06 An Improved Input Pinion Is Now Used {3254, 3256, 3258}
550 Wheel Harvester, 570 Wheel Harvester and 580 Wheel Harvester Power Train Travel Motor
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders Injector Solenoids
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed End Gates
784C, 785B, 785C, 785D, 789B, 789C, 789D, 793B, 793C, 793D, 797 and 797B Off-Highway Trucks VIMS ™ MID 049 - CID 1422 - FMI 12
784C, 785B, 785C, 785D, 789B, 789C, 789D, 793B, 793C, 793D, 797 and 797B Off-Highway Trucks VIMS ™ MID 049 - CID 1421 - FMI 12
784C, 785B, 785C, 785D, 789B, 789C, 789D, 793B, 793C, 793D, 797 and 797B Off-Highway Trucks VIMS ™ MID 049 - CID 1273 - FMI 12
784C, 785B, 785C, 785D, 789B, 789C, 789D, 793B, 793C, 793D, 797 and 797B Off-Highway Trucks VIMS ™ MID 049 - CID 1422 - FMI 09
824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Hydraulic System Vane Pump (Implement)
988G Wheel Loader Power Train Differential and Bevel Gear - Install - Rear
2000/03/13 Serviceable Parts of the Fuel Injection Pump {1251, 1251}
725 and 730 Articulated Trucks Hoist, Steering, and Brake System Breather - Inspect/Replace
CB-535B Vibratory Compactor Vibratory System Relief Valve (Pressure Override) - Test and Adjust
550 Wheel Harvester, 570 Wheel Harvester and 580 Wheel Harvester Power Train Traction Control System
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Cut Off Shoe Installation
AP-1000B and BG-260C Asphalt Pavers Auxiliary System Shutoff Valve (Ventilation System)
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Sensors
3408E and 3412E Engines for Caterpillar Built Machines Camshaft Bearings - Remove
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Senders
988G Wheel Loader Power Train Differential and Bevel Gear - Assemble