Cutting Edges and End Bits - Inspect/Replace
Show/hide table
 |
Personal injury or death can result from the blade falling. Block the blade before changing blade tips. |
 |
The cutting edges and/or the end bits may be damaged or the cutting edges and/or the end bits may be worn excessively. Replace the cutting edges and/or the end bits, as needed.
- Place blocks under the blade. Lower the blade onto the blocks. Do not block up the blade too high. Just use enough blocks so that the end bits and the cutting edges can be removed.
- Remove the cutting edges and/or the end bits.
Show/hide table
 | |
| Illustration 1 | g00685415 |
- Install the new cutting edges and/or the end bits.
- Raise the blade and remove the blocks.
Caterpillar Information System:
725 and 730 Articulated Trucks Hoist, Steering, and Brake System Oil Level - Check
988G Wheel Loader Power Train Differential and Bevel Gear - Assemble
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Senders
3408E and 3412E Engines for Caterpillar Built Machines Camshaft Bearings - Remove
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Sensors
AP-1000B and BG-260C Asphalt Pavers Auxiliary System Shutoff Valve (Ventilation System)
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Cut Off Shoe Installation
550 Wheel Harvester, 570 Wheel Harvester and 580 Wheel Harvester Power Train Traction Control System
CB-535B Vibratory Compactor Vibratory System Relief Valve (Pressure Override) - Test and Adjust
725 and 730 Articulated Trucks Hoist, Steering, and Brake System Breather - Inspect/Replace
2000/03/13 Serviceable Parts of the Fuel Injection Pump {1251, 1251}
988G Wheel Loader Power Train Differential and Bevel Gear - Install - Rear
2006/03/27 The Differential and Bevel Gear Group Has Been Updated {3251, 3258}
CS-431C, CP-433C and CS-433C Vibratory Compactors Propel System Wheel and Tire
725 and 730 Articulated Trucks Fuses - Replace
216, 226 and 228 Skid Steer Loaders Engine Supplement Muffler - Remove and Install
120H Motor Grader Cutting Edges and End Bits - Inspect/Replace
3408E and 3412E Engines for Caterpillar Built Machines Camshaft Bearings - Install
797 Off-Highway Truck Power Train Transmission Hydraulic Control - Assemble
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Screed Plate Adjustment
CB-634C Vibratory Compactor Changing Engine Speed
2000/03/20 Corrections to the Power Train Disassembly and Assembly Module, SENR1217, Power Train Disassembly and Assembly Module, SENR5976-01, Power Train Disassembly and Assembly Module, SENR5995-01, Power Train Disassembly and Assembly Module, SENR6706-01, Po
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Related Components
216, 226 and 228 Skid Steer Loaders Engine Supplement Electric Starting Motor - Remove and Install - 228 Skid Steer Loader