Reverse High Speed Lockout - Program
Submode 21 is used in order to set the highest obtainable speed when the machine is in reverse.
- Use the 4C-8195 Control Service Tool to enter Transmission Calibration Mode (8) via the "MODE" switch. Then enter submode 21 by using the "SCROLL" switch.
- Use the INCREMENT (+) and DECREMENT (-) positions of the "CLEAR" switch in order to select the desired maximum speed (R1, R2, R3, or R4).
- To exit submode 21, scroll to the next submode by using the "SCROLL" switch or exit the Transmission Calibration Mode by using the "MODE" switch.
Caterpillar Information System:
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train Engagement Pressure for the Transmission Clutch - Calibrate
CS-431C, CP-433C and CS-433C Vibratory Compactors Vibratory System Hydraulic Tank
2000/01/24 Change to the Torque Specification for the Drive Shaft Bolts in Disassembly and Assembly Manuals, SENR6768 and SENR1217 {3253}
924G and 924GZ Wheel Loaders Power Train Differential - Assemble
3034 Engine for Caterpillar Built Machines Fuel Shutoff Solenoid
924G and 924GZ Wheel Loaders Power Train Differential - Disassemble
924G and 924GZ Wheel Loaders Machine Systems Brake Control Valve (Service) - Remove and Install
824G Wheel Tractor, 825G Soil Compactor and 826G Landfill Compactor Hydraulic System Pilot System Pressure - Test
CP-433C, CS-431C and CS-433C Paving Compactors Axle Oil Sample - Obtain
1999/12/01 New Engine News Format {0374}
3508B Engine for Caterpillar Built Machines Crankshaft Wear Sleeves and Seals
2000/01/31 New Electronic Control Module (ECM) Provides Improved Reliability {1901}
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train Calibration and Programming
CP-433C, CS-431C and CS-433C Paving Compactors Drum Scrapers - Inspect/Adjust/Replace
D400E Series II Articulated Truck Power Train General Information
2000/01/17 Production Process Change Eliminates Antirotation Retaining Pin In Rear Wheel Station {4201}
CP-433C, CS-431C and CS-433C Paving Compactors Engine Oil and Filter - Change
228 and 248 Skid Steer Loaders Machine Systems General Information
988G Wheel Loader Power Train Bypass Switch (Power Train Oil Filter)
Installation and Removal Procedure for the Padded Shell Kit Attachment{6605} Installation and Removal Procedure for the Padded Shell Kit Attachment{6605}
1999/12/13 Rollover Protection Structures (ROPS) Are Now Available {7325}
1999/12/20 A Lubricant Has Been Added to the Splines of the Pump Drive Gearbox {3108}
CP-433C, CS-431C and CS-433C Paving Compactors Engine Oil Sample - Obtain
2002/11/11 Support Literature Is Now Available For Maintaining Excavator Heating and Air Conditioning Systems {7309, 7320}