Axle Oil Sample - Obtain
Show/hide table
 | |
| Illustration 1 | g00683870 |
The drain plug is located on the bottom of the differential.
Refer to the Caterpillar Machine Fluids Recommendations, SEBU6250, "S·O·S Oil Analysis" and refer to the Operation and Maintenance Manual, "Sampling Interval and Location of Sampling Valve" for more information.
Caterpillar Information System:
1999/12/01 New Engine News Format {0374}
3508B Engine for Caterpillar Built Machines Crankshaft Wear Sleeves and Seals
2000/01/31 New Electronic Control Module (ECM) Provides Improved Reliability {1901}
2000/02/21 The New 10.0X Class of VIMS Onboard Software and the New Version 4.0 VIMS Hardware {7610, 7620}
988G Wheel Loader Power Train Relief Valve (Transmission Hydraulic Control)
924G and 924GZ Wheel Loaders Power Train NoSPIN Differential - Assemble
3054B Industrial Engine Engine Oil Filter Base - Assemble
2000/01/17 A New 1250 cc Hydraulic Motor is Available for the Powered Rear Axles {3278}
TH62, TH63, TH82 and TH83 Telehandlers Hydraulic System Load Control Valve (Boom Cylinder)
D350E Series II, D400E Series II and D400E Series II Ejector Articulated Trucks Braking System Service Brake
D350E Series II, D400E Series II and D400E Series II Ejector Articulated Trucks Braking System Pressure Switch
D400E Series II Articulated Truck Power Train Operation Checks
824G Wheel Tractor, 825G Soil Compactor and 826G Landfill Compactor Hydraulic System Pilot System Pressure - Test
924G and 924GZ Wheel Loaders Machine Systems Brake Control Valve (Service) - Remove and Install
924G and 924GZ Wheel Loaders Power Train Differential - Disassemble
3034 Engine for Caterpillar Built Machines Fuel Shutoff Solenoid
924G and 924GZ Wheel Loaders Power Train Differential - Assemble
2000/01/24 Change to the Torque Specification for the Drive Shaft Bolts in Disassembly and Assembly Manuals, SENR6768 and SENR1217 {3253}
CS-431C, CP-433C and CS-433C Vibratory Compactors Vibratory System Hydraulic Tank
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train Engagement Pressure for the Transmission Clutch - Calibrate
966G Wheel Loader and 972G Wheel Loader Power Train Reverse High Speed Lockout - Program
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train Calibration and Programming
CP-433C, CS-431C and CS-433C Paving Compactors Drum Scrapers - Inspect/Adjust/Replace
D400E Series II Articulated Truck Power Train General Information