NoSPIN Differential - Assemble
- Put differential case (3) in a suitable press.
- Install side gear (13), retainer (12), spring (11), clutch assembly (10), and spider assembly (9).
Show/hide table
Illustration 2 g00891863 - Install clutch assembly (8), spring (7), retainer (6), spacer block (5), and side gear (4).
Show/hide table
Parts under spring force can cause personal injury. When the bolts are removed, the spring force against the differential case will be released.
To avoid personal injury, put the differential in a press before the bolts are removed in order to retain the case half.
Show/hide table
Illustration 3 g00664087 - Install differential case (2) on differential case (3). Use a suitable press in order to compress the spring in the differential. Install bolts (1).
Show/hide table
| |
| Illustration 1 | g00891864 |
End By:
- Install the differential and the bevel gear. Refer to Disassembly and Assembly, "Differential and Bevel Gear - Install".
Caterpillar Information System:
3054B Industrial Engine Engine Oil Filter Base - Assemble
2000/01/17 A New 1250 cc Hydraulic Motor is Available for the Powered Rear Axles {3278}
TH62, TH63, TH82 and TH83 Telehandlers Hydraulic System Load Control Valve (Boom Cylinder)
D350E Series II, D400E Series II and D400E Series II Ejector Articulated Trucks Braking System Service Brake
D350E Series II, D400E Series II and D400E Series II Ejector Articulated Trucks Braking System Pressure Switch
D400E Series II Articulated Truck Power Train Operation Checks
D350E Series II, D400E Series II and D400E Series II Ejector Articulated Trucks Braking System Relief Valve (Brake Oil Cooler)
D350E Series II, D400E Series II and D400E Series II Ejector Articulated Trucks Braking System Another Service Brake System Valve
D350E Series II, D400E Series II and D400E Series II Ejector Articulated Trucks Braking System Secondary Brake System
TH62, TH63, TH82 and TH83 Telehandlers Braking System Brake Cylinder (Master)
D350E Series II, D400E Series II and D400E Series II Ejector Articulated Trucks Braking System Brake Accumulator
2000/02/28 New Breather Improves the Filling Procedure for the Hydraulic Tank {5056}
988G Wheel Loader Power Train Relief Valve (Transmission Hydraulic Control)
2000/02/21 The New 10.0X Class of VIMS Onboard Software and the New Version 4.0 VIMS Hardware {7610, 7620}
2000/01/31 New Electronic Control Module (ECM) Provides Improved Reliability {1901}
3508B Engine for Caterpillar Built Machines Crankshaft Wear Sleeves and Seals
1999/12/01 New Engine News Format {0374}
CP-433C, CS-431C and CS-433C Paving Compactors Axle Oil Sample - Obtain
824G Wheel Tractor, 825G Soil Compactor and 826G Landfill Compactor Hydraulic System Pilot System Pressure - Test
924G and 924GZ Wheel Loaders Machine Systems Brake Control Valve (Service) - Remove and Install
924G and 924GZ Wheel Loaders Power Train Differential - Disassemble
3034 Engine for Caterpillar Built Machines Fuel Shutoff Solenoid
924G and 924GZ Wheel Loaders Power Train Differential - Assemble
2000/01/24 Change to the Torque Specification for the Drive Shaft Bolts in Disassembly and Assembly Manuals, SENR6768 and SENR1217 {3253}