Differential - Disassemble
Start By:
- Remove the differential and the bevel gear. Refer to Disassembly and Assembly, "Differential and Bevel Gear - Remove".
- Mark case assembly for assembly purposes.
- Remove bolts (1) and case assembly (2).
Show/hide table
Illustration 2 g00664323 - Remove thrust washer (4) and bevel gear (3).
Show/hide table
Illustration 3 g00664324 - Remove the spider and gear assembly (5).
Show/hide table
Illustration 4 g00664325 - Remove thrust washer (9), bevel pinion (8), and sleeve bearing (7) from spider (6).
- Repeat for the remainder of the spider and gear assembly.
Show/hide table
Illustration 5 g00664326 - Remove bevel gear (10).
Show/hide table
Illustration 6 g00891755 - Remove thrust washer (11) from case assembly (12).
Show/hide table
Illustration 1 | g00664322 |
Caterpillar Information System:
924G and 924GZ Wheel Loaders Machine Systems Brake Control Valve (Service) - Remove and Install
824G Wheel Tractor, 825G Soil Compactor and 826G Landfill Compactor Hydraulic System Pilot System Pressure - Test
CP-433C, CS-431C and CS-433C Paving Compactors Axle Oil Sample - Obtain
1999/12/01 New Engine News Format {0374}
3508B Engine for Caterpillar Built Machines Crankshaft Wear Sleeves and Seals
2000/01/31 New Electronic Control Module (ECM) Provides Improved Reliability {1901}
2000/02/21 The New 10.0X Class of VIMS Onboard Software and the New Version 4.0 VIMS Hardware {7610, 7620}
988G Wheel Loader Power Train Relief Valve (Transmission Hydraulic Control)
924G and 924GZ Wheel Loaders Power Train NoSPIN Differential - Assemble
3054B Industrial Engine Engine Oil Filter Base - Assemble
2000/01/17 A New 1250 cc Hydraulic Motor is Available for the Powered Rear Axles {3278}
TH62, TH63, TH82 and TH83 Telehandlers Hydraulic System Load Control Valve (Boom Cylinder)
3034 Engine for Caterpillar Built Machines Fuel Shutoff Solenoid
924G and 924GZ Wheel Loaders Power Train Differential - Assemble
2000/01/24 Change to the Torque Specification for the Drive Shaft Bolts in Disassembly and Assembly Manuals, SENR6768 and SENR1217 {3253}
CS-431C, CP-433C and CS-433C Vibratory Compactors Vibratory System Hydraulic Tank
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train Engagement Pressure for the Transmission Clutch - Calibrate
966G Wheel Loader and 972G Wheel Loader Power Train Reverse High Speed Lockout - Program
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train Calibration and Programming
CP-433C, CS-431C and CS-433C Paving Compactors Drum Scrapers - Inspect/Adjust/Replace
D400E Series II Articulated Truck Power Train General Information
2000/01/17 Production Process Change Eliminates Antirotation Retaining Pin In Rear Wheel Station {4201}
CP-433C, CS-431C and CS-433C Paving Compactors Engine Oil and Filter - Change
228 and 248 Skid Steer Loaders Machine Systems General Information