General Information
When you are defining a problem with the power train system, perform the procedures that follow. First, perform visual inspections. The information is in this manual. When the visual inspections are complete and the problem is not fully understood, perform operational checks. After visual inspections and operation checks are complete and the problem is not fully understood, perform test procedures. The test procedures are in this manual. These procedures will help identify system problems.
Troubleshooting can be complex. Refer to Testing and Adjusting, "Torque Converter Troubleshooting" and Testing and Adjusting, "TransmissionTroubleshooting" for a list of possible problems and corrections.
This list of possible problems and possible corrections will only provide an indication of the location of a problem and the repairs that are required. Remember that a problem is not necessarily caused by one part, but by the relation of one part with other parts. This list can not provide all possible problems and corrections. Service personnel must find the problem and the source of the problem. Then, complete the necessary repairs.
Caterpillar Information System:
CP-433C, CS-431C and CS-433C Paving Compactors Drum Scrapers - Inspect/Adjust/Replace
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train Calibration and Programming
966G Wheel Loader and 972G Wheel Loader Power Train Reverse High Speed Lockout - Program
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train Engagement Pressure for the Transmission Clutch - Calibrate
CS-431C, CP-433C and CS-433C Vibratory Compactors Vibratory System Hydraulic Tank
2000/01/24 Change to the Torque Specification for the Drive Shaft Bolts in Disassembly and Assembly Manuals, SENR6768 and SENR1217 {3253}
924G and 924GZ Wheel Loaders Power Train Differential - Assemble
3034 Engine for Caterpillar Built Machines Fuel Shutoff Solenoid
924G and 924GZ Wheel Loaders Power Train Differential - Disassemble
924G and 924GZ Wheel Loaders Machine Systems Brake Control Valve (Service) - Remove and Install
824G Wheel Tractor, 825G Soil Compactor and 826G Landfill Compactor Hydraulic System Pilot System Pressure - Test
CP-433C, CS-431C and CS-433C Paving Compactors Axle Oil Sample - Obtain
2000/01/17 Production Process Change Eliminates Antirotation Retaining Pin In Rear Wheel Station {4201}
CP-433C, CS-431C and CS-433C Paving Compactors Engine Oil and Filter - Change
228 and 248 Skid Steer Loaders Machine Systems General Information
988G Wheel Loader Power Train Bypass Switch (Power Train Oil Filter)
Installation and Removal Procedure for the Padded Shell Kit Attachment{6605} Installation and Removal Procedure for the Padded Shell Kit Attachment{6605}
1999/12/13 Rollover Protection Structures (ROPS) Are Now Available {7325}
1999/12/20 A Lubricant Has Been Added to the Splines of the Pump Drive Gearbox {3108}
CP-433C, CS-431C and CS-433C Paving Compactors Engine Oil Sample - Obtain
2002/11/11 Support Literature Is Now Available For Maintaining Excavator Heating and Air Conditioning Systems {7309, 7320}
CP-433C, CS-431C and CS-433C Paving Compactors Engine Oil Level - Check
1999/12/20 Additional Components for the Premier Grade and Slope Control Is Now Available {5645, 7219, 7220}
3412E Engine for Caterpillar Built Machines Injector Solenoid Circuit - Test