Final Drive Oil Level - Check
Note: This procedure is only for the 580 Wheel Harvester. Only the front four wheels have final drives. The rear wheels are not equipped with final drives.
Show/hide table
 | |
| Illustration 1 | g00869054 |
- Position the machine so that the final drive filler plug is horizontal to the centerline of the wheel.
- Remove the filler plug. The oil level should be at the bottom of the filler plug opening. Add oil, if necessary.
Note: If the oil level is higher than the filler plug opening, do not allow the oil to drain to the level of the filler plug opening.
- Clean the filler plug and install the filler plug.
- Repeat the procedure for the other three final drives.
Caterpillar Information System:
784C, 785C and 785C HAA Off-Highway Truck/Tractors Hydraulic System Body Mounting
583R Pipelayer Engine Supplement Air Cleaner - Remove and Install
24H Motor Grader Transmission Electronic Control System And Hydraulic Calibrations CID 0444 FMI 05 Magnetic Switch (Start Relay) Current Below Normal - Test
583R Pipelayer Engine Supplement Muffler - Remove and Install
3406C Engines for Caterpillar Built Machines Fuel Injection Pump
583R Pipelayer Power Train Duo-Cone Inverted Seals - Install
C-10 and C-12 Industrial Engines Inlet Air Temperature Sensor
784C and 785C Off-Highway Trucks Machine Systems Check Valve (Primary Air Tank) - Remove and Install
784C, 785C and 785C HAA Off-Highway Truck Air System and Brakes Air Control Valve (Service Brake)
3306B Industrial Engine Starting the Engine
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Bank Valve - Disassemble
Caterpillar Monitoring System General Information
784C and 785C Off-Highway Trucks Machine Systems Relief Valve (Air Tank) - Remove and Install
D250E Series II and D300E Series II Articulated Trucks Power Train Priority Valve - Remove and Install
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Power Train Belt and Drive
583R Pipelayer Engine Supplement Turbocharger - Remove and Install
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Power Train Drawbar
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Fixed Axle (Front) - Remove
550, 570 and 580 Wheel Harvesters Final Drive Oil - Change
784C and 785C Off-Highway Truck Power Train Torque Converter - Assemble
784C and 785C Off-Highway Trucks Machine Systems Air Tank (Primary) - Remove and Install
583R Pipelayer Engine Supplement Fan - Remove and Install
3406C Engines for Caterpillar Built Machines Fuel Injection Pump Housing
789C Off-Highway Truck Hydraulic System General Information