Steering Tank and Filter - Install
- Check all of the O-ring seals and the components for wear or damage. Replace the components, if necessary.
- Lubricate all of the O-ring seals lightly with the lubricant that is being sealed.
Show/hide table
Illustration 1 g00493774 - Use a suitable lifting device and a hoist in order to position steering tank (1) onto the platform for installation. The weight of steering tank (1) is
113 kg (250 lb) . - Use nine bolts (5) and the washers in order to install steering tank (1) onto the platform. Remove the lifting device.
Show/hide table
Illustration 2 g00493772 - Connect hose assembly (4) to steering tank (1).
Show/hide table
Illustration 3 g00493770 - Connect hose assembly (3) to steering tank (1).
Show/hide table
Illustration 4 g00493769 - Connect hose assembly (2) to steering tank (1).
Show/hide table
Illustration 5 g00493767 - Fill steering tank (1) with hydraulic oil to the correct level. Refer to Operation and Maintenance Manual, SEBU7173, "Steering System Oil - Change" for the correct procedure.
Note: Cleanliness is an important factor. Before the installation procedure, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble.
End By:
- Remove the retaining cable. Refer to Disassembly and Assembly, "Body Retaining Cable - Remove and Install".
Caterpillar Information System:
769D Off-Highway Truck and 771D Quarry Truck Heating and Air Conditioning Control
583R Pipelayer Engine Supplement Hood and Dust Ejector - Remove and Install
583R Pipelayer Engine Supplement Electric Starting Motor - Remove and Install
784C, 785C and 785C HAA Off-Highway Truck/Tractors Hydraulic System Control Valve (Pulled Unit)
784C and 785C Off-Highway Trucks Machine Systems Steering Tank and Filter - Assemble
550, 570 and 580 Wheel Harvesters Backup Alarm
24H Motor Grader Hydraulic and Steering System Position Sensor (Ripper)
583R Pipelayer Engine Supplement Alternator - Remove and Install
583R Pipelayer Power Train Duo-Cone Conventional Seals - Install
784C, 785C and 785C HAA Off-Highway Truck/Tractors Hydraulic System Control Valve (Hoist)
24H Motor Grader Hydraulic and Steering System Position Sensor (Articulation)
793C Off-Highway Truck Machine Systems Gear Pump (Hoist) - Disassemble
Caterpillar Monitoring System General Information
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Bank Valve - Disassemble
3306B Industrial Engine Starting the Engine
784C, 785C and 785C HAA Off-Highway Truck Air System and Brakes Air Control Valve (Service Brake)
784C and 785C Off-Highway Trucks Machine Systems Check Valve (Primary Air Tank) - Remove and Install
C-10 and C-12 Industrial Engines Inlet Air Temperature Sensor
583R Pipelayer Power Train Duo-Cone Inverted Seals - Install
3406C Engines for Caterpillar Built Machines Fuel Injection Pump
583R Pipelayer Engine Supplement Muffler - Remove and Install
24H Motor Grader Transmission Electronic Control System And Hydraulic Calibrations CID 0444 FMI 05 Magnetic Switch (Start Relay) Current Below Normal - Test
583R Pipelayer Engine Supplement Air Cleaner - Remove and Install
784C, 785C and 785C HAA Off-Highway Truck/Tractors Hydraulic System Body Mounting