Backup Alarm
Show/hide table
 | |
| Illustration 1 | g00713751 |
Show/hide table
| Backup Alarm - The alarm will sound when the reverse pedal is pressed. The backup alarm is used to alert people behind the machine when the machine is backing up. |
The backup alarm is located under the engine hood on the left rear side of the machine.
Show/hide table
 | |
| Illustration 2 | g00713919 |
A three-position adjustable switch on the rear of the backup alarm regulates the volume of the alarm. The alarm is set at the highest sound level when the machine is shipped from the factory. Unless a lower volume is required by the job site, the volume should remain at the HIGH setting.
Caterpillar Information System:
24H Motor Grader Hydraulic and Steering System Position Sensor (Ripper)
583R Pipelayer Engine Supplement Alternator - Remove and Install
583R Pipelayer Power Train Duo-Cone Conventional Seals - Install
784C, 785C and 785C HAA Off-Highway Truck/Tractors Hydraulic System Control Valve (Hoist)
24H Motor Grader Hydraulic and Steering System Position Sensor (Articulation)
793C Off-Highway Truck Machine Systems Gear Pump (Hoist) - Disassemble
966G Wheel Loader and 972G Wheel Loader Power Train Switches
3406E On-Highway Engine Electric Starting Motor - Remove and Install
24H Motor Grader Hydraulic and Steering System Temperature Switch (Hydraulic Oil)
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Bank Valve - Install
3406C Engines for Caterpillar Built Machines Fuel Injection Lines
24H Motor Grader Transmission Electronic Control System And Hydraulic Calibrations CID 0444 FMI 03 Magnetic Switch (Start Relay) Voltage Above Normal - Test
784C and 785C Off-Highway Trucks Machine Systems Steering Tank and Filter - Assemble
784C, 785C and 785C HAA Off-Highway Truck/Tractors Hydraulic System Control Valve (Pulled Unit)
583R Pipelayer Engine Supplement Electric Starting Motor - Remove and Install
583R Pipelayer Engine Supplement Hood and Dust Ejector - Remove and Install
769D Off-Highway Truck and 771D Quarry Truck Heating and Air Conditioning Control
784C and 785C Off-Highway Trucks Machine Systems Steering Tank and Filter - Install
Caterpillar Monitoring System General Information
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Bank Valve - Disassemble
3306B Industrial Engine Starting the Engine
784C, 785C and 785C HAA Off-Highway Truck Air System and Brakes Air Control Valve (Service Brake)
784C and 785C Off-Highway Trucks Machine Systems Check Valve (Primary Air Tank) - Remove and Install
C-10 and C-12 Industrial Engines Inlet Air Temperature Sensor