Usage:
416C (1WR, 1XR, 4ZN, 5YN),
426C (1CR, 1ER, 1MR, 1NR, 1YR, 1ZR, 6XN, 7WN),
428C (2CR, 8RN),
436C (1FR, 1GR, 1PR, 1RR, 2AR, 2BR, 8TN, 9JN),
438C (1JR, 1TR, 2DR, 9KN) Backhoe Loaders;
M315 (7ML1061-1064, 7ML1215-Up),
M312 (6TL540-541, 6TL635-Up) Excavators
- SUPPLEMENT: NOVEMBER 8, 1999
Service Magazine SEPD0483, Article 6, Page 7, August 2, 1999; "Cold Start Advance Solenoid Available".
The subtitle of this article includes an incorrect excavator model. The model M316 is not correct. The correct excavator model is M312 (6TL540, 541, and 635-Up) Excavators
--------------- END SUPPLEMENT ---------------
Description of Change:
This article replaces the article with the same title on Page 6 of the May 17, 1999 issue.
The coil assembly, locknut, and solenoid for the cold start advance unit used on the fuel injection pump groups of the 3054 Engines in these machines are now available through the Caterpillar parts distribution system. The coil assembly, locknut, and solenoid have been made serviceable so the fuel injection pump does not need to be removed from the engine for repair by an authorized Standyne(r) Dealer in order to correct a minor fault or damage with the cold start advance unit.
Adaptable To: The 137-6395 Coil Assembly, 137-6396 Locknut, and 174-8831 Solenoid are available as serviceable repair parts for the cold start advance unit used on the following fuel injection pump groups:
These fuel injection pump groups are found on emissions certified 3054 Engines used in the above machines.