1999/07/05 Caterpillar


New Knob Kit Available For Track Tension Manifold {4197,5051}

Usage:


AP-1055B (8BM1-Up, ABB1-Up),
BG-2455C (6TN1-Up, ACM1-Up) Asphalt Pavers

The following knob kit is now available for installation on MTS 112-4568 Track Tension Manifolds on asphalt pavers.

Required Parts

Two 155-3991 Knob Kits.

Installation Procedure

1. Remove track tension manifold cover plate.


(1) Locknut (valve control).
(2) Track tension manifold.

2. Remove locknut from 123-8923 Valve Control.

3. Install locknut knob on valve control. (This will be the threaded knob.)

4. Install remaining knob onto valve control. Use 3/32 allen wrench to secure valve control.

Caterpillar Information System:

1999/07/05 Transmission Maximum Gear is Programmable with Electronic Technician {3168,7610}
1999/07/05 Refrigerant Compressor Group Improvements Increase Belt Life and Reduce Guard Cracking {1802,1807}
1999/07/05 VIMS-PC Version 2.4.2 MST Update Available {7601}
1999/07/05 New Tube Assemblies Used In Torque Converter Lines Group {3101}
1999/07/05 Replacing Propel Pumps On Vibratory Compactors {5070}
1999/07/05 Troubleshooting The Gear Position Sensor On Individual Clutch Modulation Transmissions {3168}
1999/07/05 Incorrect End Float For Limited Slip Differentials {3258}
1999/07/05 New Clutch Discs With Improved Core Material Now Available For Large Off-Highway Trucks {3187,3030}
1999/07/05 Improved Sun Gear Available For Off-Highway Trucks And Tractors {4050,4055}
1999/07/05 New Lifting Capacity Warning Film Now Available {7405}
1999/07/05 Improved Drawbar/Three-Point Hitch Increases Durability {7120}
1999/06/28 Special Instruction, REHS0494, "Accessing Flash Software For Machines", Is Now Available {7620}
1999/07/12 Snap Ring Improves Rod Wiper Seal Retention {4303,5101,5102,5104,5213}
1999/07/12 Improved Main Fuel Tank Available {1273}
1999/07/12 Stronger PTO Shaft Available {3107}
1999/07/12 New Flow Controls/ Compensators Available {5000,5050,5051}
1999/07/12 Rear Window Latch Improved {7310,7301}
1999/07/12 Implement Pump Changed {5057,5070}
1999/07/12 Supplement To Correct Power Train D&A On Assemble Final Drives {4050}
1999/07/12 Improved Quick Coupler For Backhoe Loaders Provides Better Vertical Digging {6129}
1999/07/12 Proper Cylinder Eye And Rod Eye Diameters Ensure Bearing Retention In Suspension Cylinders {7213}
1999/07/12 Correction To Certain Off-Highway Truck Service Manual Modules {0374,7521}
1999/07/12 New Engine Electronic Control Groups (Personality Modules) Available {1902}
1999/07/12 New Joint For Transmission Oil Cooler Lines {1375,3154}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.