1999/07/05 Caterpillar


Incorrect End Float For Limited Slip Differentials {3258}

Usage:


D250E (5TN),
D300E (7FN) Articulated Truck

Reference: Service Manual Module, SENR8653-01, Disassembly and Assembly. D250E and D300E Articulated Trucks, Power Train. Disassemble & Assemble Front, Center & Rear Differentials, Page 172, Step 13. This manual is part of SENR8650 Service Manual.

The allowable End Float specified in Step 13 is incorrect. The correct allowable End Float should read:

0.2 to 0.8 mm (.008 to .031 in)

Caterpillar Information System:

1999/07/05 New Clutch Discs With Improved Core Material Now Available For Large Off-Highway Trucks {3187,3030}
1999/07/05 Improved Sun Gear Available For Off-Highway Trucks And Tractors {4050,4055}
1999/07/05 New Lifting Capacity Warning Film Now Available {7405}
1999/07/05 Improved Drawbar/Three-Point Hitch Increases Durability {7120}
1999/06/28 Special Instruction, REHS0494, "Accessing Flash Software For Machines", Is Now Available {7620}
1999/06/28 Revised CD-ROM For Hydraulic Electronic Unit Injector (HEUI) Fuel System Available {0350}
1999/06/28 Improved Fenders Increase Service Life {7252}
1999/06/28 Remote Forward-Neutral-Reverse Transmission Control Option Eases Operation {5705,3065}
1999/06/28 Hydraulic S·O·S Port Relocated {7542}
1999/06/28 Dimensions For Articulated Hitches, Lift Arms, Front And Rear Levers, And Oscillating Rear Axle Assemblies Are Now Available In An Updated Special Instruction {3260,3268,6116,6118,6119,6125,6126,6127,7057,7069,7100}
1999/06/28 New VIMS Service Manual Available {7601}
1999/06/28 Actuator For Transmission Switch Can Be Service Replaced {7332}
1999/07/05 Troubleshooting The Gear Position Sensor On Individual Clutch Modulation Transmissions {3168}
1999/07/05 Replacing Propel Pumps On Vibratory Compactors {5070}
1999/07/05 New Tube Assemblies Used In Torque Converter Lines Group {3101}
1999/07/05 VIMS-PC Version 2.4.2 MST Update Available {7601}
1999/07/05 Refrigerant Compressor Group Improvements Increase Belt Life and Reduce Guard Cracking {1802,1807}
1999/07/05 Transmission Maximum Gear is Programmable with Electronic Technician {3168,7610}
1999/07/05 New Knob Kit Available For Track Tension Manifold {4197,5051}
1999/07/12 Snap Ring Improves Rod Wiper Seal Retention {4303,5101,5102,5104,5213}
1999/07/12 Improved Main Fuel Tank Available {1273}
1999/07/12 Stronger PTO Shaft Available {3107}
1999/07/12 New Flow Controls/ Compensators Available {5000,5050,5051}
1999/07/12 Rear Window Latch Improved {7310,7301}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.