Intake Manifold
Usage:
Remove Intake Manifold
1. Remove the coolant from engine cooling system.
2. Remove water supply line (5) and return line (4) for aftercooler.
3. Remove vent line (1) and instrument panel (3).
4. Remove intake elbow (2) from aftercooler housing.
5. Fasten a hoist to intake manifold as shown.
6. Remove bolts (6) and intake manifold. Weight of manifold is 225 lb. (102 kg).
Install Intake Manifold
1. Put intake manifold (1) in place on engine and install bolts that hold manifold to cylinder head.
2. Install intake elbow (3) on aftercooler housing.
3. Install vent line and instrument panel (2).
4. Install water supply line and return line for aftercooler.
5. Fill engine cooling system with coolant to correct level.
Caterpillar Information System:
D353 INDUSTRIAL & MARINE ENGINES Aftercooler
D353 INDUSTRIAL & MARINE ENGINES Water Manifold
D353 INDUSTRIAL & MARINE ENGINES Turbocharger
D353 INDUSTRIAL & MARINE ENGINES Air Cleaner Assembly
D353 INDUSTRIAL & MARINE ENGINES Precombustion Chambers
D353 INDUSTRIAL & MARINE ENGINES Fuel Injection Lines
D353 INDUSTRIAL & MARINE ENGINES Fuel Injection Valves
D353 INDUSTRIAL & MARINE ENGINES Water Temperature Regulators
D353 INDUSTRIAL & MARINE ENGINES Crankshaft Main Bearings
D353 INDUSTRIAL & MARINE ENGINES Oil Pump Drive
D353 INDUSTRIAL & MARINE ENGINES Oil Pan
D353 INDUSTRIAL & MARINE ENGINES Oil Pump
D353 INDUSTRIAL & MARINE ENGINES Rocker Shaft Assembly And Push Rods
D353 INDUSTRIAL & MARINE ENGINES Rocker Shaft Assembly
D353 INDUSTRIAL & MARINE ENGINES Cylinder Head Assembly (Earlier)
D353 INDUSTRIAL & MARINE ENGINES Cylinder Head Assembly (Later)
D353 INDUSTRIAL & MARINE ENGINES Spacer Plate
D353 INDUSTRIAL & MARINE ENGINES Valve Lifters
D353 INDUSTRIAL & MARINE ENGINES Valves
D353 INDUSTRIAL & MARINE ENGINES Valve Seat Inserts
D353 INDUSTRIAL & MARINE ENGINES Valve Guides
D353 INDUSTRIAL & MARINE ENGINES Water Directors
D353 INDUSTRIAL & MARINE ENGINES Camshaft
D353 INDUSTRIAL & MARINE ENGINES Camshaft Bearings