Aftercooler
Usage:
Remove Aftercooler
1. Remove the coolant from the engine cooling system.
2. Disconnect vent line (1).
3. Remove water supply line (3) and return line (4).
4. Remove cover (2) from aftercooler housing.
5. Remove aftercooler (5) from housing.
Install Aftercooler
1. Install two guide bolts (1) 3/8"-16NC 5 in. long in the top corners of aftercooler housing.
2. Install aftercooler (2) in housing. Be sure dowel on back of aftercooler engages with holes in aftercooler housing.
3. Install cover (4) on aftercooler housing.
4. Connect vent line (3) and install the water supply line and return line.
5. Fill engine with coolant to correct level.
Caterpillar Information System:
D353 INDUSTRIAL & MARINE ENGINES Water Manifold
D353 INDUSTRIAL & MARINE ENGINES Turbocharger
D353 INDUSTRIAL & MARINE ENGINES Air Cleaner Assembly
D353 INDUSTRIAL & MARINE ENGINES Precombustion Chambers
D353 INDUSTRIAL & MARINE ENGINES Fuel Injection Lines
D353 INDUSTRIAL & MARINE ENGINES Fuel Injection Valves
D353 INDUSTRIAL & MARINE ENGINES Water Temperature Regulators
D353 INDUSTRIAL & MARINE ENGINES Crankshaft Main Bearings
D353 INDUSTRIAL & MARINE ENGINES Oil Pump Drive
D353 INDUSTRIAL & MARINE ENGINES Oil Pan
D353 INDUSTRIAL & MARINE ENGINES Oil Pump
D353 INDUSTRIAL & MARINE ENGINES Piston Cooling Tubes
D353 INDUSTRIAL & MARINE ENGINES Intake Manifold
D353 INDUSTRIAL & MARINE ENGINES Rocker Shaft Assembly And Push Rods
D353 INDUSTRIAL & MARINE ENGINES Rocker Shaft Assembly
D353 INDUSTRIAL & MARINE ENGINES Cylinder Head Assembly (Earlier)
D353 INDUSTRIAL & MARINE ENGINES Cylinder Head Assembly (Later)
D353 INDUSTRIAL & MARINE ENGINES Spacer Plate
D353 INDUSTRIAL & MARINE ENGINES Valve Lifters
D353 INDUSTRIAL & MARINE ENGINES Valves
D353 INDUSTRIAL & MARINE ENGINES Valve Seat Inserts
D353 INDUSTRIAL & MARINE ENGINES Valve Guides
D353 INDUSTRIAL & MARINE ENGINES Water Directors
D353 INDUSTRIAL & MARINE ENGINES Camshaft