Valve Lifters
Usage:
Remove Valve Lifters
start by:
a) remove cylinder head assembly
1. Remove retaining ring (1) from lifter.
2. Remove lifter from cylinder head assembly.
NOTE: If old lifters are to be used again, put identification on lifters with respect to their location in cylinder head assembly.
Install Valve Lifters
1. Install lifter (1) in cylinder head assembly.
NOTE: If old lifter is being used again it must be installed in same position from which it was removed.
2. Install retaining ring on lifter.
end by:
a) install cylinder head assembly
Caterpillar Information System:
D353 INDUSTRIAL & MARINE ENGINES Spacer Plate
D353 INDUSTRIAL & MARINE ENGINES Cylinder Head Assembly (Later)
D353 INDUSTRIAL & MARINE ENGINES Cylinder Head Assembly (Earlier)
D353 INDUSTRIAL & MARINE ENGINES Rocker Shaft Assembly
D353 INDUSTRIAL & MARINE ENGINES Rocker Shaft Assembly And Push Rods
D353 INDUSTRIAL & MARINE ENGINES Intake Manifold
D353 INDUSTRIAL & MARINE ENGINES Aftercooler
D353 INDUSTRIAL & MARINE ENGINES Water Manifold
D353 INDUSTRIAL & MARINE ENGINES Turbocharger
D353 INDUSTRIAL & MARINE ENGINES Air Cleaner Assembly
D353 INDUSTRIAL & MARINE ENGINES Precombustion Chambers
D353 INDUSTRIAL & MARINE ENGINES Fuel Injection Lines
D353 INDUSTRIAL & MARINE ENGINES Valves
D353 INDUSTRIAL & MARINE ENGINES Valve Seat Inserts
D353 INDUSTRIAL & MARINE ENGINES Valve Guides
D353 INDUSTRIAL & MARINE ENGINES Water Directors
D353 INDUSTRIAL & MARINE ENGINES Camshaft
D353 INDUSTRIAL & MARINE ENGINES Camshaft Bearings
D353 INDUSTRIAL & MARINE ENGINES Pistons (Earlier)
D353 INDUSTRIAL & MARINE ENGINES Pistons (Later)
D353 INDUSTRIAL & MARINE ENGINES Pistons
D353 INDUSTRIAL & MARINE ENGINES Cylinders Liners (Earlier)
D353 INDUSTRIAL & MARINE ENGINES Cylinder Liners (Later)
D353 INDUSTRIAL & MARINE ENGINES Vibration Damper And Pulley